Radial shaft seal DBH 6141Pol — 60.33 x 79.37 x 10.80

DBH 6141Pol is a radial shaft seal reference, within Seals. Request a quote for 6141Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6141Pol radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants in equipment with a rotating shaft. It mounts in cylindrical housings and works on the shaft with a flexible lip that compensates for small misalignments. It is a wear part: when oil loss or dust ingress appears, it is replaced. Its dimensions are standardized to make replacement easier in pumps, gear reducers and motors.

This item is a radial shaft seal from the DBH brand, identified with the part number 6141Pol. Its dimensions are: shaft diameter 60.33 mm, housing diameter 79.37 mm and height 10.80 mm. The indicated design is A 013-R-H, which corresponds to a configuration with a sealing lip and reinforced body. It is a lip-type seal, not a static gasket: its function is to seal dynamically on a rotating shaft.

Seals of this size are used in equipment where oil or grease must be contained and the entry of water, dust or chips prevented. They appear in gearboxes, centrifugal pumps, electric motors, conveyor rollers and agricultural or road machinery. Also in applications where the shaft has continuous rotary motion and a simple, low-maintenance barrier is sought.

To select a seal properly you must verify three things: that the shaft diameter and the housing diameter match those of the part, that the height is admissible for the cavity, and that the lip material is compatible with the fluid and the working temperature. Mounting is done with the shaft clean, free of burrs, lubricating the lip and using a bushing or cone so as not to damage it. If the shaft is scratched or has play, the seal will not seal even if it is new.

If you need a nearby size or an equivalent, the most practical thing is to send the part number 6141Pol or the dimensions taken with a caliper: shaft diameter, housing diameter and height. With that data we look for the available alternative in the same series or in another brand. It is also advisable to specify the type of fluid and the temperature, because that defines the lip material. At MR Accesorios Industriales the DBH brand is carried as part of the seals and radial shaft seals line.

To request a quote for this seal or ask about a similar size, write to us on WhatsApp with the part number 6141Pol and the shaft and housing dimensions. If you have a photo of the old part or the drawing, even better: that way the design is confirmed and a replacement error is avoided.