Radial shaft seal DBH 6130 — 46.00 x 76.27 x 12.70

DBH 6130 is a radial shaft seal reference, within Seals. Request a quote for 6130 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6130 oil seal is a single-lip radial seal, designed to retain lubricant and exclude contaminants in rotating equipment. It mounts on a 46 mm shaft and in a 76.27 mm housing, with a height of 12.70 mm. Its A 020-R design corresponds to the standard DBH oil seal line. It is a common replacement part in pumps, electric motors, gear reducers and transmission boxes, where sealing prevents leaks and the entry of dust or water.

The DBH 6130 is a single-lip radial shaft seal with the following dimensions: shaft diameter 46 mm, housing diameter 76.27 mm and height 12.70 mm. The A 020-R design identifies the lip geometry and the type of case. This type of seal is used to seal the passage of the shaft through a housing, retaining the oil or grease on the inner side and blocking the entry of dirt from the outside. The designation 6130 is the part number you will use to order it or to look for an equivalent.

Typical applications of a seal of these dimensions are centrifugal pumps, electric motors, speed reducers, gearboxes and transmission equipment. It also appears in machine tools, compressors and conveyor systems. In all cases it fulfills the same function: keeping the lubricant inside the assembly and preventing external agents from wearing the bearings or the sealing surfaces. If the equipment works with a lot of vibration or temperature, it is advisable to check the condition of the shaft before replacing it.

To install a radial shaft seal, verify that the shaft has no burrs or deep marks in the contact area. Lubricate the lip with the same grease or oil as the equipment before sliding it on. The seal must enter perpendicular to the housing, without blows that deform the case. If the housing is damaged, the seal will not seat properly and will leak. When selecting, in addition to the dimensions, take into account the type of fluid, the working temperature and the shaft speed. The A 020-R design is the standard of the series for these conditions.

If you need a neighboring size or an equivalent from another brand, send us the part number 6130 and the shaft, housing and height dimensions. With that data we can look for an alternative within the DBH line or other brands we carry. We can also guide you if the original seal has a special design, such as double lip or dust guard. The more complete the equipment information, the faster we find the part you need.

To request a quote for the DBH 6130 oil seal, send the part number on WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo of the old part or the dimensions taken with a caliper. That way we send you the quote without hassle.