DBH 6105Sil radial shaft seal — 35 x 56 x 9.5

DBH 6105Sil is a reference of radial shaft seal, within Seals. Request a quote for 6105Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6105Sil radial shaft seal is a lip seal that mounts between a rotating shaft and its housing to contain lubricant and block the entry of dust, water or particles. Its Lx design combines a sealing lip with a metal body that fits under pressure into the cavity. It is used in gearboxes, pumps, electric motors and power transmission equipment where bearings and gears must be protected. MR Accesorios Industriales carries it as part of its line of seals and oil seals.

This seal has a 35.00 mm shaft diameter, a 56.00 mm housing diameter and a 9.50 mm height. The Lx design corresponds to a seal with a sealing lip and outer metal reinforcement, intended to be press-fitted into the cavity with the lip resting on the shaft. The lip elastomer works against the shaft surface, while the rigid body ensures concentricity and retention in the housing. It is a standard replacement part within the radial shaft seal category.

Typical applications of this seal appear in equipment with rotating shafts that need to retain oil or grease: gearboxes, reducers, centrifugal pumps, electric motors, compressors and belt or chain drives. It is also found in agricultural machinery, material handling equipment and process lines where the environment has dust or moisture. In all cases, its function is to prevent lubricant leaks and the entry of contaminants that shorten bearing life.

To select the correct seal, check that the shaft diameter, housing diameter and height match the dimensions of the original part. The shaft surface must be clean, free of burrs or deep marks, and it is advisable to lubricate the lip before installing it. The seal is pressed in perpendicular to the shaft, without striking the lip. If the shaft shows wear, consider a design with an auxiliary lip. Temperature and the type of fluid also influence the choice of lip material.

If you need an equivalent or a different size, you can send us the part number 6105Sil or the dimensions of the original seal (shaft diameter, housing and height). With that data we look for alternatives within the DBH line or from other brands we carry. We can also advise you if the mounting space allows a seal with a slightly different height or diameter. The more complete the equipment information, the more accurate the proposal.

To request a quote for this DBH 6105Sil seal, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo of the old part or the dimensions taken with a caliper. Our technical team reviews the case and replies promptly. We work with seals and oil seals for replacement and maintenance, and we can guide you on installation and basic care so the replacement lasts.