DBH 6038 radial shaft seal — 69.85 x 107.93 x 15.87

DBH 6038 is a reference of radial shaft seal, within Seals. Request a quote for 6038 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6038 radial shaft seal is a lip seal that is mounted in the housing and seals against the rotating shaft to retain lubricant and block the ingress of dust, water or particles. Due to its dimensions of 69.85 mm shaft, 107.93 mm housing and 15.87 mm height, with Lx design, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this brand and advises you so you choose the correct oil seal.

This item is a radial shaft seal from the DBH line, identified with the code 6038. Its dimensions are 69.85 mm shaft diameter, 107.93 mm housing diameter and 15.87 mm height. The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. The elastomeric lip seals against the shaft track and the outer metal case fits by interference in the housing. It is a wear part: over time the lip hardens or wears and starts to leak oil.

Typical applications for this oil seal include gearboxes, reducers, centrifugal pumps, electric motors, rollers and power transmission equipment. In all cases it performs two functions: preventing oil or grease leaks to the outside and protecting the bearings and gears from contaminant ingress. When the oil seal works in an environment with dust, chips or water, the lip design and the elastomer material define its service life. That is why it is advisable to check the condition of the shaft and the housing before replacing it.

To select the correct oil seal, check that the three dimensions match those of the housing and the shaft: shaft diameter, housing diameter and height. Also check the condition of the track: a scratched, worn or burred shaft ruins the new lip within a few hours. When installing it, lubricate the lip with the same service oil or grease, insert it perpendicular to the shaft and use a tube or press that presses on the metal edge, never on the lip. If the housing has burrs, clean it before seating.

To quote the code 6038, send us the dimensions of the old oil seal or the code stamped on the case. You can also send the shaft diameter, housing diameter and height, and we look for the equivalent in DBH or another brand we carry. If the Lx design does not suit your application, we evaluate alternatives with different lip configurations. The more data you give us, the faster we send you the quote.

To request a quote for the DBH 6038 oil seal or ask about an equivalent, write to us on WhatsApp with the code and the quantity you need. At MR Accesorios Industriales we work with brands, and we help you resolve the selection if you have doubts. You can also ask us about other seals, bearings, housings or power transmission. Send the code and we will reply with the quote.