Radial shaft seal DBH 6033 — 79.30 x 102.82 x 11.11

DBH 6033 is a radial shaft seal reference, within Seals. Request a quote for 6033 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6033 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 79.30 mm shaft diameter, 102.82 mm housing bore and 11.11 mm height make it suitable for equipment with standard housings. It is press-fitted into the housing and works on the shaft with a flexible lip that compensates for small misalignments. It is a wear part that should be replaced when leaks or noise appear.

This DBH 6033 oil seal has an Lz design and is identified by its numeric designation. The dimensions listed on its product page are: shaft diameter 79.30 mm, housing bore diameter 102.82 mm and height 11.11 mm. The Lz design corresponds to a single-lip configuration with a spring, intended for rotating shafts with lubrication. The DBH brand is an official brand that MR carries, so the replacement is available under that identification.

Radial shaft seals such as this one are used in gearboxes, pumps, electric motors, rollers and power transmission equipment. Their function is twofold: prevent the escape of oil or grease and block the entry of dust, water or particles. In environments with vibration or moderate temperature, the lip maintains contact with the shaft and extends the life of the bearing and the lubricant. It is a critical part in preventive maintenance.

To install a seal, you must check that the shaft has no burrs or wear and that the housing is clean and free of dents. It is recommended to lubricate the lip before installation and to use an installation tool that presses on the outer diameter, never on the lip. The selection depends on the speed, the temperature and the type of fluid. If the shaft has a worn track, it is advisable to consider a seal with an offset lip or a repair sleeve.

If you need a nearby size or an equivalent from another brand, send us the code 6033 or the dimensions of your shaft and housing. At MR Accesorios Industriales we can look for alternatives within the same category of radial shaft seals, respecting the standard dimensions. We can also advise you on the most suitable lip design for your equipment. The idea is that you are not left with the machine stopped because of a wear part.

To request a quote for this DBH 6033 oil seal, send the code on WhatsApp to MR Accesorios Industriales. If you have doubts about the size, attach a photo of the old seal or the dimensions measured with a caliper. With that data we confirm the reference and send you the quote. We work with official brands and in-house manufacturing, and we have been supplying Argentine industry for more than 80 years.