Radial shaft seal DBH 5966 — 47.63 x 73.03 x 11.90

DBH 5966 is a radial shaft seal reference, within Seals. Request a quote for 5966 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5966 radial shaft seal is a lip seal that prevents oil or grease leaks and the entry of contaminants in equipment with a rotating shaft. It is installed in cylindrical housings and runs on the shaft with a minimal lubricating film. Its dimensions of 47.63 mm shaft, 73.03 mm housing and 11.90 mm height, with Mz design, make it suitable for industrial applications requiring a reliable and long-lasting barrier.

This DBH 5966 radial shaft seal has a shaft diameter of 47.63 mm, a housing diameter of 73.03 mm and a height of 11.90 mm. The Mz design corresponds to a configuration with sealing lip and spring, intended for rotating shafts with lubrication. The DBH brand is an official brand that MR supplies, so the replacement part matches the standardized dimensions for this type of seal. It is used in gearboxes, pumps, electric motors and other equipment where retaining lubricant and excluding dust or water is critical.

Typical applications include gear transmissions, heavy machinery bearings, mixers, conveyors and process equipment. In all cases, the seal protects the bearings and extends the service life of the assembly by keeping the lubrication clean. It is commonly found in equipment where the shaft rotates at moderate speeds and the working temperature does not exceed the limits of the elastomer. It is also used as a replacement in preventive or corrective maintenance when oil leaks are detected.

To install the radial shaft seal, verify that the shaft and housing are clean, free of burrs and scratches, and lubricate the lip with the same oil used in the equipment. Insert the seal perpendicularly, without striking the lip, using a suitable installation tube. Selection must consider peripheral speed, temperature and the type of fluid. The Mz design is suitable for shafts rotating in a single direction; if the equipment reverses rotation, ask about a specific variant. Always compare the actual dimensions before replacing.

If you need a radial shaft seal with neighboring dimensions or an equivalent from another brand, send us code 5966 or the shaft, housing and height dimensions. At MR Accesorios Industriales we can look for the alternative that best suits your equipment. We can also advise you on the most suitable design according to the type of lubricant and working conditions. Feel free to ask about variants in materials or special configurations.

To request a quote for the DBH 5966 radial shaft seal, write to us on WhatsApp with the code and the required quantity. At MR Accesorios Industriales we have more than 80 years of experience in the field and we help you find the correct seal for your application. We can also advise you on installation and precautions to avoid premature failures. Your inquiry is welcome: the more data you give us, the better the response will be.