DBH 5952 radial shaft seal — 49.2 x 66.62 x 7.18

DBH 5952 is a reference of radial shaft seal, within Seals. Request a quote for 5952 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5952 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions —49.2 mm shaft diameter, 66.62 mm housing and 7.18 mm height— allow you to replace worn seals in equipment with specific dimensions. MR Accesorios Industriales carries this brand so you can maintain sealing in gearboxes, pumps and transmissions. If you need to ensure your machine keeps running, this oil seal is a direct option.

The DBH 5952 is an oil seal with the Mt design, with the following dimensions: shaft diameter 49.2 mm, housing diameter 66.62 mm and height 7.18 mm. These dimensions correspond to designation 5952 and are the ones you must verify before replacing a seal. The Mt design indicates a specific construction configuration that DBH identifies with that abbreviation; for details on the lip, material or spring, consult the manufacturer's data sheet. Do not improvise dimensions: an oil seal with different dimensions will not seal correctly.

Radial shaft seals such as the DBH 5952 are used on shafts that rotate inside a fixed housing, for example in gearboxes, centrifugal pumps, electric motors, conveyor rollers and gear transmissions. Their function is twofold: to retain the oil or grease inside and to prevent the entry of dust, water or particles. In environments with vibration or moderate temperature, a properly selected oil seal extends bearing life and reduces lubricant loss. It is a wear part that should be checked at every preventive maintenance interval.

To install a radial shaft seal, verify that the shaft has no burrs or excessive wear in the contact area, and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and install the oil seal perpendicular to the shaft using a suitable support tube. Avoid striking the lip or the spring. If the shaft has a deep groove, consider an oil seal with the lip in another position. Selection depends on speed, temperature and type of lubricant; if in doubt, consult the manufacturer.

If you need an oil seal equivalent to the DBH 5952, the most practical approach is to send us the full part number and the dimensions of the original seal. You can also provide the shaft diameter, housing diameter and height, along with a photo of the part. With that data we indicate the direct alternative in the same brand or in another line we carry. MR Accesorios Industriales can guide you on compatibility and applications.

To request a quote for the DBH 5952 oil seal or ask about a replacement, send the part number via WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that fit your equipment. If you have a list of oil seals for maintenance, send it complete and we will review it piece by piece. We work with brands, and we can advise you so you choose the right seal without hassle.