Radial shaft seal DBH 5888Vit — 55.00 x 80.00 x 10.00

DBH 5888Vit is a radial shaft seal reference, within Seals. Request a quote for 5888Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5888Vit radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 55 mm shaft diameter, 80 mm housing diameter and 10 mm height, and Lx design, it is press-fitted into crankcases, covers and gearboxes. MR Accesorios Industriales carries this brand and advises you so you can choose the right seal according to the shaft, the housing and the operating conditions.

This item is a DBH 5888Vit radial shaft seal, identified by its commercial designation. Its dimensions are 55.00 mm shaft diameter (d), 80.00 mm housing diameter (D) and 10.00 mm height (h). The Lx design corresponds to a single-lip seal with a spring, intended for rotating shafts with lubrication. The elastomeric lip bears on the shaft and closes off the passage of lubricant, while the outer body fits into the housing by interference.

Typical applications for a seal of these dimensions appear in gearboxes, pumps, electric motors, rollers and transmission equipment. It is also used in agricultural machinery, earthmoving equipment and process lines where oil or grease must be retained and dust or water kept out. As it is a wear part, it is advisable to check the lip and the seat every time the assembly is disassembled.

To install it, verify that the shaft is clean, free of burrs or deep marks, and that the surface where the lip bears has the proper roughness. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, without striking it unevenly. If the housing shows play or wear, consider a nearby size or a seal with a reinforced case. The final selection depends on speed, temperature and the type of lubricant.

If you need an equivalent or a nearby size, send us the code 5888Vit together with the shaft and housing dimensions. You can also send a photo of the old seal or the data of the cover where it is mounted. At MR Accesorios Industriales we compare that information against the alternatives and propose the option that best fits your equipment.

To request a quote for this DBH 5888Vit seal, write to us on WhatsApp and send us the code and the quantity you need. If you have doubts about the size or the design, our technical team helps you confirm the reference before buying. MR Accesorios Industriales works with official brands and in-house manufacturing to cover industrial applications in Argentina.