Radial shaft seal DBH 5887Sil — 60.33 x 79.38 x 9.50

DBH 5887Sil is a radial shaft seal reference, within Seals. Request a quote for 5887Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5887Sil radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With dimensions of 60.33 mm shaft, 79.38 mm housing and 9.50 mm height, and Lz design, it is a replacement part for equipment with continuous rotation. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a radial shaft seal from the DBH brand, identified with the part number 5887Sil. Its dimensions are 60.33 mm shaft diameter, 79.38 mm housing diameter and 9.50 mm height. The Lz design corresponds to a single lip configuration with spring, intended for rotating shafts with lubrication. The sealing lip runs on the shaft and the outer case fits into the housing, creating a static seal and a dynamic seal. It is a wear part that is replaced when lubricant leakage or contaminant ingress appears.

It is used in gearboxes, pumps, electric motors, rollers and transmission equipment where a shaft rotates inside a housing. It also appears in agricultural machinery, process equipment and conveying equipment. Its function is twofold: to keep oil or grease inside the assembly and to prevent external agents from entering that accelerate wear on bearings and gears. In dusty or humid environments, a seal in good condition extends the service life of the other components.

To install it, check that the shaft has no burrs or marks and that the sealing surface is clean and lubricated. The seal is inserted perpendicular to the shaft, without striking the lip, using a tube or spacer that rests on the metal case. Before fitting it, check that the shaft, housing and height dimensions match those of the original seal. If the shaft shows wear, consider a neighboring size or an alternative design. The selection depends on the speed, temperature and type of lubricant of the equipment.

If you cannot find the part number 5887Sil or you need a different size, send us the shaft, housing and height dimensions along with a photo of the old seal. The code engraved on the part or the equipment model also helps. With that data we look for the equivalent in the DBH line or in another brand we carry. If the Lz design is not the right one for your application, we review it with you. The goal is for you to leave with the correct seal and not a similar one.

MR Accesorios Industriales carries the DBH brand within its seals and oil seals line. To request a quote for this seal, send the part number 5887Sil by WhatsApp along with the quantity you need. If you have doubts about installation or want to confirm that it is the correct replacement, write to us and we will look at it. We have more than 80 years in the industrial sector, since 1945, and we handle technical inquiries from workshops, plants and maintenance.