Radial shaft seal DBH 5844 — 69.85 x 95.50 x 19.05

DBH 5844 is a radial shaft seal reference, within Seals. Request a quote for 5844 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5844 radial shaft seal is a lip seal designed to stop oil or grease at the point where a shaft rotates inside a housing. With a 69.85 mm shaft diameter, 95.50 mm housing diameter and 19.05 mm height, and design A 157, it is press-fitted into the housing and runs against the shaft surface. It is a wear part: when lubricant leakage appears or dirt gets in, it is replaced. MR Accesorios Industriales carries this brand and helps you identify the correct size.

This item is a radial shaft seal from the DBH line, identified by the code 5844. Its dimensions are 69.85 mm shaft diameter (d), 95.50 mm housing diameter (D) and 19.05 mm height (h). The indicated design is A 157, which defines the geometry of the lip and the metal case. It is a single-section seal, with an elastomeric lip and sheet metal case, suitable for rotating shafts with lubricant on the inner side. Always confirm these three dimensions against the housing before mounting.

It is used in equipment where oil or grease must be retained and dust or water excluded: gearboxes, pumps, electric motors, drive shafts, rollers and process machinery. It also appears in agricultural and industrial applications where the shaft rotates at moderate speed and the temperature is not extreme. In all these cases it performs the same function: keeping lubricant in and contaminants out, extending the life of the bearing or bushing that accompanies the shaft.

To select it, verify that the shaft diameter, housing diameter and height match those of the seal. Check the condition of the shaft surface: if it has scratches, wear or burrs, the lip will not seal properly and it is advisable to repair it or use a sleeve. When mounting, lubricate the lip, insert it perpendicular to the shaft with a tube or press that rests on the outer edge, and avoid hitting it with a hammer. If the old seal has a different code, compare the three dimensions and the design before replacing it.

If you cannot find the 5844 or need a nearby size, send us the code, the shaft, housing and height dimensions, and a photo of the old seal. With that data we look for the equivalent in the same brand or in another line we carry. We can also verify design A 157 against the manufacturer's data sheet to confirm that the lip and case geometry are the correct ones for your equipment.

MR Accesorios Industriales carries the DBH brand and has more than 80 years supporting industry with bearings, power transmission, seals and mounting tools. If you want a quote for this seal or to ask about a nearby size, write to us on WhatsApp with the code 5844 and we will reply with the alternative that best suits your application.