Radial shaft seal DBH 5841 — 73.20 x 101.68 x 19.00

DBH 5841 is a radial shaft seal reference, within Seals. Request a quote for 5841 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5841 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions —73.20 mm shaft diameter, 101.68 mm housing and 19.00 mm height— correspond to a specific application, so it is used as a direct replacement in equipment that already has that housing. MR Accesorios Industriales sells this brand and will quote it for you on WhatsApp with the code 5841.

This item is a radial shaft seal from the DBH brand, identified with designation 5841. Its dimensions are: shaft diameter (d) 73.2 mm, housing diameter (D) 101.68 mm and height (h) 19.00 mm. The indicated design is A 002, which corresponds to the construction configuration of the lip and the outer body. It is a radial type seal, intended to be mounted in a cylindrical housing and seal on a rotating shaft. It is not a standard-size seal: its dimensions respond to a specific application.

It is used in rotating equipment where oil or grease must be contained and the entry of dust, water or particles prevented. It appears in gearboxes, pumps, electric motors, rollers and transmissions. Also in agricultural machinery, process equipment and industrial assemblies where the shaft has that exact diameter. The function is twofold: retain the lubricant on the inner side and act as a barrier against external contamination. If the seal is worn out, it usually shows up as lubricant loss or dirt entering the bearing.

To select a seal you must verify three things: the shaft diameter, the housing diameter and the height. All three values must match those of the original component. The condition of the shaft surface also matters: if it shows wear, scratches or a marked track, the new lip may not seal properly. During installation, lubricate the lip before inserting it, seat the seal well perpendicular to the housing and push without striking the lip. If the housing has burrs, clean it before mounting.

If you need an equivalent seal or a nearby size, the most practical thing is to send the code 5841 or the dimensions 73.20 x 101.68 x 19.00 mm. With that data we can look for an alternative from the same brand or another firm, always comparing shaft diameter, housing and height. If the shaft is worn, it is worth evaluating a seal with an offset lip or a repair sleeve. Do not replace by approximation: one millimeter of difference in the housing changes the fit.

MR Accesorios Industriales sells the DBH brand and has more than 80 years in the business. If this seal is for equipment you have down, send the code 5841 on WhatsApp and we will send you the quote. You can also ask about other sizes in the line or about seals for similar applications.