Radial shaft seal DBH 5777 — 34.93 x 57.15 x 11.90

DBH 5777 is a radial shaft seal reference, within Seals. Request a quote for 5777 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5777 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 34.93 mm shaft diameter, 57.15 mm housing bore and 11.90 mm height make it suitable for equipment with shafts of approximately 1 3/8 inches. The Mz design indicates a specific construction configuration that should be checked against the manufacturer's product page. MR Accesorios Industriales supplies this official brand and advises you so you choose the right seal for your application.

This item is a radial shaft seal from the DBH brand, identified by the code 5777. Its standard dimensions are 34.93 mm for the shaft diameter (d), 57.15 mm for the housing bore diameter (D) and 11.90 mm for the overall height (h). The Mz design corresponds to a construction variant that defines the geometry of the lip and the metal case. These values come from the manufacturer's designation and must be checked against the original part before replacing it.

Radial shaft seals such as the DBH 5777 are used in gearboxes, pumps, electric motors, drive shafts and continuous process equipment. Their job is twofold: retain the oil or grease inside the assembly and prevent the ingress of dust, water or particles that accelerate wear on bearings and gears. In food, chemical or water treatment plants, the selection of the lip material is critical depending on the fluid and the working temperature.

To install this seal correctly, check that the shaft has no burrs or wear and that the housing is clean and free of deformation. Lubricate the lip with the same oil used in the equipment before inserting it, and press perpendicularly so as not to damage the seal. Shaft runout and surface roughness affect service life: check the permissible values according to the manufacturer. If the shaft is worn, consider a repair sleeve or an alternative size.

If you need a seal equivalent to the 5777 or a nearby size, send us the code engraved on the part, the shaft, housing and height dimensions, and a photo of the assembly. With that data we can look for the alternative available in our line of seals and oil seals. We can also advise you on the lip material and the type of spring depending on the fluid and the operating temperature of your equipment.

To request a quote for the DBH 5777 seal or ask about a similar size, write to us on WhatsApp with the code and the dimensions. At MR Accesorios Industriales we have more than 80 years of experience in industrial component distribution and we help you identify the right part for your maintenance.