DBH 5763 radial shaft seal — 31.75 x 50.36 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 5763 is a reference of radial shaft seal, within Seals. Request a quote for 5763 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 5763 radial shaft seal is a lip seal mounted in a machine housing to retain lubricant and prevent the entry of dust, water or particles. Its Mz design combines a sealing lip with a metal body that fits into the cavity under pressure. It is used in gearboxes, pumps, electric motors and power transmission equipment where the shaft rotates on bearings or bushings and oil or grease must be contained.
This oil seal has the following dimensions: shaft diameter 31.75 mm, housing diameter 50.36 mm and height 12.70 mm. The Mz design corresponds to an oil seal with a sealing lip and an outer metal structure, designed to be press-fitted into the housing and seal against the shaft. The designation 5763 identifies this size within the DBH line, a brand MR sells.
It is used in equipment where the passage of a rotating shaft through a housing must be sealed: gearboxes, gear cases, centrifugal pumps, electric motors, compressors, machine tools and belt or chain drive systems. It also appears in agricultural and industrial applications where the environment has dust, moisture or oil splashes and the bearing or bushing needs protection.
To choose the right oil seal, verify that the shaft diameter, housing diameter and height match those of the original part. The Mz design defines the lip type and body material, but installation requires a ground shaft surface free of burrs, and a clean housing free of deformation. If the shaft is worn, a repair sleeve may be needed or the size may have to be changed.
To quote 5763, send us the shaft diameter, housing diameter and height you measured via WhatsApp, plus a photo of the old oil seal. With that data we look for the equivalent in DBH or in another brand we sell. We can also advise you on whether the Mz design is right for your application or whether another lip type is better.
If you already have code 5763, send it via WhatsApp along with the quantity you need and we will send you a quote. If you are unsure about the size, send us the dimensions and we will help you confirm the replacement.
Dimensions
- Shaft (d)
- 31.75mm
- Housing bore (D)
- 50.36mm
- Height (h)
- 12.70mm
- Design
- Mz
Frequently Asked Questions
- What are the dimensions of the DBH 5763 oil seal?
- The DBH 5763 oil seal has a shaft diameter of 31.75 mm, a housing diameter of 50.36 mm and a height of 12.70 mm. These are the dimensions listed in the manufacturer's data sheet and the ones you should compare with your original part before requesting a quote.
- What does the Mz design mean on this oil seal?
- The Mz design identifies a radial shaft seal with a sealing lip and a metal body for press fitting. It is the type of oil seal used to retain lubricant and exclude contaminants on rotating shafts. If your application has special conditions, ask us on WhatsApp.
- How do I request the 5763 oil seal or an equivalent?
- Send code 5763 via WhatsApp to MR Accesorios Industriales. If you are not sure about the size, send us the shaft diameter, housing diameter and height, and we will tell you the corresponding oil seal.