Radial shaft seal DBH 5735 — 74.60 x 107.93 x 19.05

DBH 5735 is a radial shaft seal reference, within Seals. Request a quote for 5735 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5735 radial shaft seal is a lip seal mounted between a rotating shaft and a stationary housing to retain lubricant and block the entry of dust, water or particles. Its dimensions of 74.60 mm shaft, 107.93 mm housing and 19.05 mm height correspond to a specific application, so it is advisable to verify the bore before replacing it. MR Accesorios Industriales carries this brand and helps you confirm the size or the right equivalent for your equipment.

This item is a seal from the DBH line, identified with part number 5735 and Lx design. Its dimensions are 74.60 mm shaft diameter, 107.93 mm housing diameter and 19.05 mm height. The Lx design corresponds to a seal with a sealing lip and metal case, intended for rotating shafts with lubrication. Since this is a specific size, it should not be replaced by approximation: the fit on the shaft and the interference in the housing are part of how the seal works.

Radial shaft seals of this type are used in gearboxes, pumps, electric motors, rollers and power transmission equipment where a shaft rotates inside a housing with oil or grease. They also appear in applications exposed to dust or water, where the lip must keep contamination out of the bearing. If the equipment operates at high temperature or high speeds, it is advisable to check the lip material and the type of lubricant before defining the replacement.

To install a seal, work with a clean shaft, free of burrs or marks on the sealing surface, and lubricate the lip before inserting it. The part must enter perpendicular to the housing, with a tool that presses on the outer diameter and not on the lip. If the shaft shows wear, one option is to use a seal with an offset lip or a repair sleeve. In all cases, the shaft and housing dimensions are what matter: a different seal is not forced into place.

If part number 5735 is not available or you need a nearby size, send us the shaft, housing and height dimensions, plus a photo of the old seal and the area where it is mounted. With that data we can look for the equivalent in the same brand or in another line we carry. The part number stamped on the seal or the equipment model also helps. The more precise the information, the faster we reach the right part.

To request a quote for the DBH 5735 seal or ask about an equivalent, write to us on WhatsApp with the part number and dimensions. At MR Accesorios Industriales we work with seals and oil seals for different applications and guide you so the part matches your equipment. If you have doubts about installation or the condition of the shaft, raise them along with your inquiry: technical advice is part of the service.