Radial shaft seal DBH 5570Sil — 110.00 x 130.00 x 13.00

DBH 5570Sil is a radial shaft seal reference, within Seals. Request a quote for 5570Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5570Sil radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of dust, water or contaminating particles. With dimensions of 110 mm shaft, 130 mm housing and 13 mm height, and an Lx design, it is used in gearboxes, pumps, electric motors and industrial equipment in general. MR Accesorios Industriales supplies this official brand and advises you so you choose the correct seal for your application.

This item is a DBH 5570Sil radial shaft seal, identified by its designation 5570Sil. Its dimensions are 110 mm shaft diameter (d), 130 mm housing diameter (D) and 13.00 mm height (h). The Lx design corresponds to a configuration with sealing lip and metal body, suitable for retaining oil or grease on rotating shafts. The DBH brand is an official brand that MR supplies, so you can ask us about this size and its alternatives.

Typical applications of a seal of this size include gearboxes, reducers, centrifugal pumps, electric motors, transmission shafts and process equipment. In all cases, the seal runs on a rotating shaft and inside a machined housing, separating the lubricant from the outside environment. It is commonly found in equipment where a reliable barrier against leaks and contamination is required, with moderate peripheral speeds and temperatures within the usual range of standard elastomers.

To correctly install a radial shaft seal, check that the shaft has adequate hardness and roughness, with no burrs or marks that could damage the lip. Lubricate the lip with the same service oil or grease before inserting it, and seat the seal with a press or suitable tool, applying uniform force on the outer diameter. The Lx design and the 110 x 130 x 13 mm dimensions must match the housing and the shaft; if space allows, consider a seal with an auxiliary lip or high-temperature-resistant material depending on the fluid and working speed.

If you need an equivalent or a nearby size, the most practical thing is to send us the code engraved on the old seal, the designation 5570Sil or the dimensions measured with a caliper. With that data, at MR Accesorios Industriales we can search for an alternative within the same DBH brand or other brands we supply, respecting the shaft, housing and height dimensions. We can also advise you on the type of elastomer and the lip design best suited to your equipment.

To move forward with the quote, send us the code 5570Sil or the dimensions 110 x 130 x 13 mm by WhatsApp. At MR Accesorios Industriales we reply with the options and the technical information you need to replace the seal without errors. If you have doubts about installation or selection, our team can help you define the best solution for your application.