Radial shaft seal DBH 5541 — 47.63 x 61.02 x 6.35

DBH 5541 is a radial shaft seal reference, within Seals. Request a quote for 5541 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5541 radial shaft seal is a lip seal that is mounted in the housing and seals against the rotating shaft to retain lubricant and block the ingress of dust, water or particles. With dimensions of 47.63 mm shaft, 61.02 mm housing and 6.35 mm height, and Mt design, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales sells this brand and advises you on choosing the correct seal.

This item is a radial shaft seal from the DBH line, identified with the code 5541. Its dimensions are 47.63 mm shaft diameter (d), 61.02 mm housing diameter (D) and 6.35 mm height (h). The Mt design corresponds to a configuration with a sealing lip and metal case, designed to retain oil or grease on rotating shafts. It is a standard replacement part within the category of seals and radial shaft seals.

Typical applications for a seal of these dimensions include gearboxes, reducers, centrifugal pumps, electric motors, compressors and belt or chain drive equipment. In all cases it performs the function of confining the lubricant inside the assembly and preventing external contamination, extending the life of bearings and gears. It is commonly found in industrial equipment where the shaft rotates at moderate speeds and the working temperature is controlled.

To install it correctly, check that the shaft and housing are clean, free of burrs and marks, and lubricate the lip before inserting it. The seal must enter perpendicular to the shaft, without blows that deform the metal case. When selecting a replacement, take into account the shaft diameter, the housing diameter, the height and the type of design; also the fluid to be retained and the speed and temperature conditions. If the shaft shows wear, consider a nearby size or a repair sleeve.

If you need an equivalent or a close size, send us the code 5541 together with the shaft and housing dimensions, a photo of the part and the type of equipment where it is mounted. With that data we can look for an alternative within the same DBH line or another brand we carry, respecting the critical dimensions. We can also advise you if the Mt design is not suitable for your application and a different lip profile is better.

MR Accesorios Industriales has more than 80 years in the industry and sells this brand. To request a quote for the DBH 5541 oil seal or ask about a similar size, write to us on WhatsApp with the code and the dimensions. We will reply shortly with the options that best fit your equipment.