DBH 5410Sil radial shaft seal — 32 x 44 x 7

DBH 5410Sil is a reference of radial shaft seal, within Seals. Request a quote for 5410Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5410Sil radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With dimensions of 32 mm shaft, 44 mm housing and 7 mm height, and Lz design, it is a common replacement part in gearboxes, pumps and electric motors. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This DBH 5410Sil oil seal has a shaft diameter of 32 mm, a housing diameter of 44 mm and a height of 7.00 mm. Its Lz design corresponds to a seal with a sealing lip and spring, intended for rotating shafts with lubrication. The designation 5410Sil identifies the size and construction type within the DBH line. It is a compact part, with a thin cross-section, that is press-fitted into the housing and rests its lip on the shaft.

It is used in equipment where oil or grease leaks must be prevented and bearings protected from the entry of contaminants. It appears in gearboxes, centrifugal pumps, electric motors, fans and machine tools. Also in agricultural and industrial applications where the shaft rotates continuously and the working temperature is moderate. It is a wear component: it should be checked when there are lubricant leaks or noise in the support.

To install it, verify that the shaft is clean, free of burrs or marks, and that the sealing surface is not worn. Lubricate the lip with the same grease or oil used in the equipment before inserting it. The seal must enter straight, without blows that deform the casing. If the housing has play or the shaft shows a deep groove, consider a repair sleeve or an alternative size. The selection depends on speed, temperature and the type of fluid to be retained.

To quote code 5410Sil, send us the shaft, housing and height dimensions, and a photo of the old seal if you have one. With that data we look for the DBH option. We also tell you whether the Lz design is suitable for your application or whether another type of lip is better. The idea is that you don't buy blindly: we confirm dimensions and prepare the quote.

MR Accesorios Industriales sells the DBH brand as part of its seals and oil seals line. If you want a quote for the 5410Sil oil seal, write to us on WhatsApp with the code and dimensions. We will reply with the alternative that best fits your equipment.