Radial shaft seal DBH 5355Sil — 58.00 x 75.00 x 12.00

DBH 5355Sil is a radial shaft seal reference, within Seals. Request a quote for 5355Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5355Sil radial shaft seal is a lip seal that closes off the passage of oil or grease on rotating shafts and prevents the entry of dust, water or particles. It is press-fitted into the housing and works on the shaft with a flexible lip that maintains the seal. It is a wear part: when lubricant loss or dirt ingress appears, it is replaced. MR Accesorios Industriales supplies this brand and helps you identify the correct size for your equipment.

This item is a DBH 5355Sil radial shaft seal with the following dimensions: shaft diameter 58 mm, housing diameter 75 mm and height 12.00 mm. The design indicated is Lz, which corresponds to the lip construction and the type of case. These values are the ones you need to compare against the shaft and housing before assembly: if the shaft is worn or the housing has burrs, the seal will not seal properly even if the dimensions match.

Radial shaft seals of this type are used in gearboxes, pumps, electric motors, rollers, mixers and power transmission equipment. Their function is to retain the lubricant inside the assembly and block the entry of external contaminants. In environments with dust, water or frequent washing, the seal works under demanding conditions and should be checked at every preventive maintenance interval.

To select the correct seal, verify that the shaft and housing diameters match the values on the product page. Also check the surface condition of the shaft: a scratched or oval-worn shaft accelerates lip failure. During assembly, lubricate the lip with the same grease or oil used in the equipment, insert it perpendicular to the shaft and tap only on the outer race, never on the lip. If the housing has a shoulder or radius, respect the seating depth.

If you cannot find the exact size or need an equivalent, send us the old code, a photo of the seal and the shaft, housing and height dimensions. With that data we look for an alternative within the same brand or another one we supply. We can also guide you if the Lz design is not suitable for your application and a different type of lip or material is needed.

To request a quote for the DBH 5355Sil seal or ask about a nearby size, write to us on WhatsApp with the code and dimensions. At MR Accesorios Industriales we have more than 80 years in the industry and we reply with the technical information you need to make your purchasing decision.