Radial shaft seal DBH 5316Sil — 30.00 x 42.00 x 7.00

DBH 5316Sil is a radial shaft seal reference, within Seals. Request a quote for 5316Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5316Sil radial shaft seal is a lip seal for rotating shafts that prevents oil or grease leaks and blocks the entry of dust and water. Its Lx design combines a sealing lip with a dust lip, making it suitable for environments with moderate dirt. It is press-fitted into cylindrical housings and runs on shafts with controlled tolerances. MR Accesorios Industriales carries this official brand and advises you on choosing the right size.

This item is a seal from the DBH line, identified as 5316Sil. Its dimensions are: shaft diameter 30 mm, housing diameter 42 mm and height 7.00 mm. The Lx design indicates a configuration with a main sealing lip and an auxiliary exclusion lip, intended to retain lubricant and repel contaminants. The part number and dimensions correspond to the manufacturer's designation, so you can use it as a direct reference for replacements.

Typical applications for a seal such as the 5316Sil include gearboxes, pumps, electric motors, transmission shafts and process equipment. In all cases, the function is to confine the lubricant inside the assembly and protect the bearings or bushings from the entry of particles. It is a wear part: when a leak or abnormal noise appears in the sealing area, it is advisable to check the condition of the lip and the shaft before replacing it.

For installation, check that the housing has the correct diameter and depth, and that the shaft has no burrs, deep scratches or wear on the sealing surface. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and do so with a tool that presses on the outer ring, never on the lip. If the shaft is damaged, a new seal will not correct the leak: the shaft must first be repaired or replaced.

If you need a nearby size or an equivalent, send us the full part number, the shaft, housing and height dimensions, and a photo of the part. With that data we can look for alternatives within the same radial shaft seal category, respecting the design and lip type. We can also advise you if the available space allows another height or if a design with a dust lip is preferable.

To request a quote for the DBH 5316Sil oil seal or ask about a similar size, write to us on WhatsApp at MR Accesorios Industriales with the part number and dimensions. We will reply with compatible options.