DBH 5312Pol radial shaft seal — 25 x 42 x 6

DBH 5312Pol is a reference of radial shaft seal, within Seals. Request a quote for 5312Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5312Pol radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and stop dust, water or particles from entering. With a 25 mm shaft, 42 mm housing and 6 mm height, and Lx design, it is a compact, commonly used size in equipment with limited space. MR Accesorios Industriales sells this brand and helps you confirm the size before requesting a quote.

The DBH 5312Pol is a single-lip radial shaft seal, identified by its designation and by the dimensions shown on the product page: shaft (d) 25 mm, housing (D) 42 mm and height (h) 6.00 mm. The Lx design refers to the seal's construction geometry, with a sealing lip that bears on the shaft and an outer body that fits into the housing. It is a common replacement component, not a custom part: it is selected by those three dimensions and by the type of service.

These seals appear in gearboxes, pumps, electric motors, drive shafts and process equipment where a shaft rotates inside a housing and oil or grease needs to be separated from the environment. They are also used in applications exposed to dust or splashes, provided the lip material is compatible with the fluid and the working temperature. In the food, chemical or process industries, it is advisable to verify that compatibility before replacing.

To install a 25 x 42 x 6 mm seal, the shaft must be clean, free of burrs and marks in the contact area, and the housing free of deformation. The lip is lubricated before insertion and the part is seated evenly, without striking the lip or the spring. If the shaft shows wear, a seal of the same size may not seal: in that case a design with an auxiliary lip is evaluated. The selection depends on the fluid, the temperature and the shaft speed.

To quote code 5312Pol, send us the shaft, housing and height dimensions, and a photo or sample of the old seal if you have one. With that data we review alternatives within the same category of radial shaft seals. We also tell you whether the Lx design is right for your application or whether another lip type is preferable.

MR Accesorios Industriales sells the DBH brand. To request a quote for the DBH 5312Pol seal or ask about an equivalent size, write to us on WhatsApp with the code and dimensions. We'll reply with the correct reference and quote terms.