DBH 5294Sil radial shaft seal — 32 x 50 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
- Seal material
- silicone
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 5294Sil is a reference of radial shaft seal, within Seals. Request a quote for 5294Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 5294Sil radial shaft seal is a lip seal that is mounted in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its Lx design and its dimensions of 32 mm shaft, 50 mm housing and 10 mm height make it suitable for gearboxes, pumps and electric motors for industrial use. At MR Accesorios Industriales we offer it as part of our seals line.
This item is a DBH 5294Sil radial shaft seal, identified by its commercial designation. Its main attributes are: shaft diameter 32 mm, housing diameter 50 mm and height 10 mm. The Lx design corresponds to a single-lip configuration with spring, intended for rotating shafts with permanent lubrication. The DBH brand is a brand that MR offers, so the product conforms to its current catalogue.
Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission equipment. In all cases, the seal separates the oil or grease from the outside environment and prevents leaks that could damage bearings and gears. It is a wear part that should be replaced when lubricant loss or abnormal shaft noise appears.
To correctly select a seal, you must verify the shaft diameter, the housing diameter and the available height. Rotation speed, operating temperature and the type of fluid to be retained also matter. The Lx design is suitable for shafts with a fine surface finish and no burrs. During assembly, lubricate the lip and use an installation tool that does not damage the seal; avoid striking it directly.
If you need an equivalent seal, the most practical approach is to send us the full code or the dimensions of the original seal. At MR Accesorios Industriales we can look for alternatives within the same radial shaft seal category, respecting the shaft, housing and height dimensions. We can also advise you on the most suitable design according to the type of application and service conditions.
To request a quote for the DBH 5294Sil seal, send us the code on WhatsApp. We will reply with the alternatives that best fit your equipment. We work to cover industrial maintenance needs in Argentina.
Dimensions
- Shaft (d)
- 32mm
- Housing bore (D)
- 50mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently Asked Questions
- What are the dimensions of the DBH 5294Sil seal?
- The DBH 5294Sil seal has a 32 mm shaft diameter, a 50 mm housing diameter and a 10 mm height. These dimensions correspond to the commercial designation and allow the replacement part to be identified without ambiguity. It is always advisable to verify the dimensions on the equipment before replacing it.
- What applications is this radial shaft seal suitable for?
- It is used in gearboxes, pumps, electric motors and equipment with rotating shafts that need to retain lubricant and exclude contaminants. Its Lx design with a single lip and spring is suitable for continuous service with oil or grease. The final choice depends on speed, temperature and the working fluid.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp with code 5294Sil or with the dimensions of the seal you need to replace. At MR Accesorios Industriales we will quote you and, if necessary, look for an equivalent design within the radial shaft seal line. We reply with concrete alternatives for your equipment.