Product page
Radial shaft seal DBH 5290 — 30.00 x 50.00 x 10.00
- Manufacturer Part Number
- 5290
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 5290 is a radial shaft seal reference, within Seals. Request a quote for 5290 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 5290 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of dust, water or particles. It is press-fitted into the housing and runs on the shaft with a flexible lip that compensates for minor misalignment. It is a wear part that is replaced during preventive maintenance of pumps, motors, gearboxes and rollers.
This item is a seal from the DBH line, identified by the code 5290. Its dimensions are 30.00 mm shaft diameter, 50.00 mm housing diameter and 10.00 mm height. The Lx design corresponds to a single-lip seal with spring, suitable for rotating shafts with lubrication. DBH is a brand that MR carries, so it is available as a standard replacement part within its catalogue.
Radial shaft seals such as the 5290 are used in centrifugal pumps, electric motors, gearboxes, conveyor rollers and transmission equipment. Their job is twofold: to retain oil or grease and to block dust from the environment. In industrial, food or process plants, this barrier prevents lubricant loss and protects the bearings, which are the most expensive components to replace.
To select a seal, take into account the shaft diameter, the housing diameter and the height. Check that the shaft surface is clean, free of burrs and marks, and lubricate the lip before installing it. The seal is pressed in, always perpendicular to the shaft, with a tube or spacer that rests on the outer ring. If the shaft is worn, consider a nearby size or a repair sleeve.
If you need an equivalent or a different size, send us the code 5290 or the dimensions 30 x 50 x 10 mm. We can also look for a seal with a different height or a design with an additional lip if the equipment requires it. We work with alternative brands and standard sizes, so if the original is not available, we offer you a compatible option.
To request a quote for the DBH 5290 seal or ask about a nearby size, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that best suit your equipment.
Dimensions
- Shaft (d)
- 30mm
- Housing bore (D)
- 50mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently Asked Questions
- What type of application is this seal suitable for?
- It is suitable for rotating shafts with lubrication, such as pumps, motors, gearboxes and rollers. It retains lubricant and prevents the entry of contaminants. It is important that the shaft and housing are in good condition so that the lip seals correctly.
- How do I request a quote or an equivalent?
- Send the code 5290 or the dimensions 30 x 50 x 10 mm by WhatsApp to MR Accesorios Industriales. If you need a different size or a different design, we can also look for it. We will reply with the options for your equipment.
- What are the dimensions of the DBH 5290 seal?
- The DBH 5290 seal has a 30.00 mm shaft diameter, a 50.00 mm housing diameter and a 10.00 mm height. These are the dimensions listed on the manufacturer's data sheet and the ones you must verify before ordering it.