DBH 5282Vit radial shaft seal

DBH 5282Vit is a reference of radial shaft seal, within Seals. Request a quote for 5282Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5282Vit radial shaft seal is a lip seal designed to close off the passage of lubricant and prevent the entry of contaminants in rotating equipment. Its Lx design and its dimensions of 70 mm shaft and 90 mm housing make it suitable for applications where a reliable barrier against dust, water and particles is required. At MR Accesorios Industriales we sell it as part of our line of seals and oil seals for industrial maintenance.

This DBH 5282Vit oil seal has a shaft diameter of 70 mm, a housing diameter of 90 mm and an Lx design. The nominal height is listed as 0 mm, so it must be confirmed against the manufacturer's data sheet before defining the mounting. The Lx design corresponds to an oil seal with a single sealing lip and metal case, suitable for rotating shafts with permanent lubrication. DBH is a brand MR sells, with radial seals.

Typical applications for this oil seal include gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission equipment in general. In all cases, the oil seal protects the bearings and gears from the entry of dust, water or chips, and retains the oil or grease inside the assembly. It is a critical part in preventive maintenance: its timely replacement prevents major failures and extends the service life of the rotating components.

To correctly select an oil seal such as the 5282Vit, verify that the shaft and housing dimensions match those of the equipment. The total height must always be checked against the technical data sheet, since it is listed as 0 mm and may be incomplete data. The Lx design is appropriate for moderate peripheral speeds and low pressures. During mounting, lubricate the lip with the same oil as the equipment, avoid impacts on the case and make sure the shaft has no burrs or excessive wear.

If you need an equivalent oil seal, you can send us the part number 5282Vit or the exact dimensions of your equipment on WhatsApp. At MR Accesorios Industriales we can guide you to find the right part. We also manufacture split plummer block housings, ANSI chains and pulleys, and we sell bearings, bushings, lubricants and mounting tools. Write to us and we will quote you shortly.