Radial shaft seal DBH 5246Sil — 15.00 x 35.00 x 8.00

DBH 5246Sil is a radial shaft seal reference, within Seals. Request a quote for 5246Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5246Sil radial shaft seal is a lip seal designed to stop lubricant leakage and prevent contaminants from entering rotating shafts. With dimensions of 15 mm shaft diameter, 35 mm housing diameter and 8 mm height, and Lz design, it is installed in gearboxes, pumps and electric motors. MR Accesorios Industriales supplies this official brand and advises you on choosing the correct seal for your application.

This item is a radial shaft seal from the DBH line, identified by the code 5246Sil. Its nominal dimensions are 15 mm shaft diameter (d), 35 mm housing diameter (D) and 8.00 mm height (h). The Lz design corresponds to a spring-loaded sealing lip, intended to retain oil or grease in equipment with rotating motion. It is a common replacement part in industrial maintenance, and its main function is to protect bearings and wear surfaces.

Typical applications for a seal of these dimensions include small centrifugal pumps, low-power electric motors, gear reducers, compressors and machine tools. It is also used in power transmission equipment where the shaft rotates at moderate speeds and lubricant containment is required. As a wear component, it should be checked at every maintenance stop and replaced if it shows leaks or hardening of the lip.

To install this seal, verify that the shaft and housing are clean, free of burrs and marks. Lubricate the lip with the same oil or grease used in the application before inserting it, and press evenly on the outer diameter, never on the lip. Selection must consider shaft speed, operating temperature and fluid type. If the equipment operates with high vibration or misalignment, consider a design with greater rigidity or an auxiliary lip.

If you need an equivalent seal or a nearby size, the most practical approach is to send us the code 5246Sil or the current dimensions (shaft diameter, housing diameter and height). With that data we can look for alternatives within the same brand or other lines we carry. We can also advise you if the mounting space allows height variants or if the lip type should be changed according to the contaminant present.

To request a quote for this DBH 5246Sil seal or ask about a similar size, send us the code via WhatsApp at MR Accesorios Industriales. We will reply with the quote and compatible options. We have more than 80 years of experience in the industry, and since 1945 we have supported factories, plants and maintenance teams with personalized technical advice.