Radial shaft seal DBH 5234Sil — 80.00 x 100.00 x 10.00

DBH 5234Sil is a radial shaft seal reference, within Seals. Request a quote for 5234Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5234Sil radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With an 80 mm shaft, 100 mm housing and 10 mm height, and Lx design, it is a common replacement part in gearboxes, pumps and power transmission equipment. MR Accesorios Industriales supplies it as part of its seals and oil seals line.

This item is a DBH brand radial shaft seal, identified by the designation 5234Sil. Its dimensions are 80 mm shaft diameter, 100 mm housing diameter and 10 mm height. The Lx design corresponds to a seal with a single sealing lip and metal case, intended for rotating shafts with permanent lubrication. The 5234Sil nomenclature makes it easy to locate in the catalogue and compare it with other alternatives in the same category.

It is used in equipment where oil or grease leaks must be prevented and bearings protected from the environment. It appears in gearboxes, electric motors, centrifugal pumps, mixers, conveyors and agricultural or process machinery. It is also common in applications where the shaft rotates at moderate speeds and the working temperature is not extreme. In all cases, the seal works alongside a bearing or bushing that needs clean lubricant free of external contamination.

To install it correctly, check that the shaft and housing diameters match the dimensions indicated and that the shaft surface is polished and free of burrs. The lip must be lubricated before insertion, and it is advisable to use an installation tool that presses on the outer edge, never on the lip. If the equipment operates in very dirty conditions, consider a version with a dust lip or double lip. The final selection depends on speed, temperature and the type of lubricant.

If you need an equivalent seal or a nearby size, send us the part number 5234Sil or the dimensions 80 x 100 x 10 mm via WhatsApp. We can look for alternatives in other brands or series with the same function, always confirming against the manufacturer's data sheet. We can also advise you if the housing or shaft is worn and a repair size is advisable. The more data you provide — equipment, position and working conditions — the more accurate the proposal.

MR Accesorios Industriales supplies the DBH brand within its seals and oil seals line. If this seal is for equipment in operation, write to us on WhatsApp with the part number 5234Sil and we will send you a quote. We can also advise you on installation or the selection of an equivalent seal for your application.