Radial shaft seal DBH 5215 — 45.00 x 62.00 x 7.00

DBH 5215 is a radial shaft seal reference, within Seals. Request a quote for 5215 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5215 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Due to its dimensions of 45 mm shaft, 62 mm housing and 7 mm height, it is a common replacement part in gearboxes, pumps and power transmission equipment. MR Accesorios Industriales carries this brand and advises you so you can choose the correct oil seal according to the shaft type and working environment.

This item is a radial shaft seal from the DBH brand, identified with the code 5215. Its dimensions are 45.00 mm shaft diameter (d), 62.00 mm housing diameter (D) and 7.00 mm height (h). The Mz-R design corresponds to a single-lip oil seal with a spring, intended for rotating shafts with lubrication and moderate speeds. The elastomer lip bears on the shaft and creates a dynamic seal that prevents oil or grease leaks and the entry of contaminants.

Typical applications for an oil seal of these dimensions include gearboxes, reducers, centrifugal pumps, electric motors, drive shafts and process equipment. In all cases it serves to separate the lubricant from the outside environment and protect bearings and gears from premature wear. It is a wear part that should be replaced when a visible leak appears or when the lip shows stiffness, cuts or deformation.

To mount it correctly, verify that the shaft has no burrs or deep marks in the contact area and that the housing is clean and free of dents. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and place the oil seal perpendicular to the shaft, without tilting it. If the shaft shows wear, consider a nearby size or a design with an auxiliary lip. The selection depends on the speed, temperature and type of fluid to be retained.

If you need an equivalent oil seal or a close size, send us the full part number, the shaft and housing dimensions, and a photo of the old oil seal if you have one. With that data we can look for an alternative within the same brand or another line we carry. We can also advise you on the lip material and spring according to the fluid and working temperature.

To request a quote for the DBH 5215 oil seal or ask about a similar size, write to us on WhatsApp at MR Accesorios Industriales with the part number and dimensions. We will reply with the options and the technical information you need to make your purchase decision.