Radial shaft seal DBH 5200 — 60.00 x 80.00 x 10.00

DBH 5200 is a radial shaft seal reference, within Seals. Request a quote for 5200 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5200 radial shaft seal is a lip seal that is mounted on the shaft and closes against the housing to retain lubricant and block the entry of dust, water or particles. Its dimensions of 60 mm shaft, 80 mm housing and 10 mm height place it in medium-sized power transmission equipment. It is a wear part: when the lip hardens or becomes marked, it starts to lose oil and should be replaced before the bearing fails.

The DBH 5200 is a radial shaft seal with Lx design, with a 60 mm shaft diameter, an 80 mm housing diameter and a 10 mm height. The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with oil or grease lubrication. The flexible lip rests on the shaft and the spring maintains contact pressure; the outer body is press-fitted into the housing. It is made of elastomer resistant to mineral oils and service temperatures common in industrial equipment.

It is used in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment where there is a shaft rotating inside a housing and the lubricant must be separated from the environment. It also appears in machine tools, conveyors and process equipment. In all these cases it performs the same function: preventing oil leaks to the outside and preventing dust or water from entering the bearing or the gearbox.

To install it, check that the shaft is clean, free of burrs and marks in the contact area, and lubricate the lip before sliding it on. The housing must be in good condition and have the correct diameter; a damaged or loose seat means the seal will not seal even if it is new. When choosing a replacement, take into account the shaft diameter, the housing diameter and the height, as well as the type of lubricant and the working temperature, because the lip compound depends on these.

If part number 5200 is not the one you need, or if the shaft or housing has a different size, send us the equipment data or the dimensions measured with a caliper. At MR Accesorios Industriales we work with the DBH line and can look for the nearby size or the equivalent within the same series. The more complete the information — diameters, height, seal type and application — the faster we can give you an alternative that fits and seals properly.

MR Accesorios Industriales carries the DBH brand and has more than 80 years of experience in bearings, seals and power transmission. If you want to request a quote for the DBH 5200 oil seal or ask about another size, write to us on WhatsApp with the part number and dimensions. We will reply with the quote and the alternatives that fit your equipment.