DBH 5160Pol radial shaft seal — 26 x 37 x 8

DBH 5160Pol is a reference of radial shaft seal, within Seals. Request a quote for 5160Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5160Pol radial shaft seal is a lip seal mounted between a rotating shaft and a stationary housing to retain lubricant and block the entry of dust, water or particles. With a 26 mm shaft diameter, 37 mm housing diameter and 8 mm height, and Lx design, it is a common size in power transmission equipment and pumps. MR Accesorios Industriales carries this brand and will quote it for you on WhatsApp.

This item is a DBH 5160Pol radial shaft seal with the following confirmed dimensions: 26.00 mm shaft diameter (d), 37.00 mm housing diameter (D) and 8.00 mm height (h). The indicated design is Lx, which corresponds to a single-lip seal with spring and an outer metal case. The sealing lip runs on the rotating shaft and the outer diameter fits into the housing by interference. It is a standard replacement part within the seals and radial shaft seals category.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment in general. It is found sealing shaft ends where there is oil or grease that must stay inside the mechanism while, at the same time, the entry of external contaminants needs to be stopped. It is also used in agricultural machinery, washing equipment and roller systems where the working environment is demanding.

For correct installation, check that the shaft has no burrs or deep marks on the sealing track and that the housing is clean and free of deformation. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, using a tube or spacer that presses on the metal case, never on the lip. If the shaft shows wear, consider a seal with an offset lip. Selection depends on the speed, temperature and type of lubricant of the equipment.

If you need an equivalent, send us the full part number, the shaft, housing and height dimensions, and a photo of the old part if you have one. With that data we can look for an alternative within the same series or from another brand we carry. We can also advise you if the Lx design is not the right one for your application and another lip type or material should be considered.

To request a quote for the DBH 5160Pol oil seal, write to us on WhatsApp with the part number 5160Pol and the quantity you need. At MR Accesorios Industriales we work with industrial brands and we will reply shortly with the alternative that best fits your equipment. If you have doubts about the size, send the dimensions and we will help you confirm it before ordering.