Skip to content
All products
DBH type Lx radial shaft seal, double lip with one spring, in section · DBH 5147
DBH 5147 radial shaft seal — 50 x 72 x 12

DBHBrand we market

DBH 5147 radial shaft seal — 50 x 72 x 12

Manufacturer Part Number5147Other seals 50 x 72 x 12 mm →
Brand
DBH
Category
Seals
Request a quote for 5147 via WhatsApp

We respond promptly.

Since 1945 · Martínez, Buenos Aires, Argentina

Request your quote via WhatsApp or email, with the quantity you need.

Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.

Ask via WhatsAppAsk via email

Description

DBH 5147 is a reference of radial shaft seal, within Seals. Request a quote for 5147 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5147 radial shaft seal is a lip seal that mounts on the shaft and inside the housing to retain lubricant and block the entry of dust, water or particles. With dimensions of 50 mm shaft, 72 mm housing and 12 mm height, and Lx design, it is a common replacement part in rotating equipment. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH 5147 radial shaft seal, identified by its designation 5147 and by the standardized dimensions: 50 mm shaft diameter (d), 72 mm housing diameter (D) and 12 mm height (h). The Lx design corresponds to a single lip configuration with spring, intended for rotating shafts with lubrication. DBH is a brand that MR sells, so the product arrives with its factory identification and traceability.

Radial shaft seals of this type are used in gearboxes, pumps, electric motors, rollers, mixers and transmission equipment. Their function is twofold: retain the oil or grease inside the assembly and prevent contaminants from entering from the outside. In environments with dust, chips or moisture, the sealing lip works on the shaft and maintains sealing while the equipment is running.

To install a seal, check that the shaft has no burrs or wear and that the housing is clean and free of deformation. Lubricate the lip before inserting it and press it in with a tube of suitable diameter, without striking the seal directly. Selection depends on shaft speed, working temperature and the type of fluid; if the original seal has a different height or design, it is advisable to compare the product page before replacing it.

To quote code 5147 or the dimensions 50 x 72 x 12 mm, send us a message via WhatsApp. You can also send the equipment part number or a photo of the old seal. At MR Accesorios Industriales we check the designation and provide a compatible alternative within the DBH line or other brands we sell.

MR Accesorios Industriales sells bearings, housings, transmission, seals, bushings, mounting tools and lubricants. To request a quote for the DBH 5147 seal or ask about another size, write to us on WhatsApp with the code and we will reply shortly.

Dimensions

Shaft (d)
50mm
Housing bore (D)
72mm
Height (h)
12.00mm
Design
Lx

Frequently Asked Questions

What are the dimensions of the DBH 5147 seal?
The DBH 5147 seal has a 50 mm shaft diameter, a 72 mm housing diameter and a 12 mm height. These are the dimensions shown in the designation and allow you to compare it with the original seal before installing it.
What type of application is this seal suitable for?
It is a radial shaft seal with a single lip and spring, suitable for rotating shafts with lubrication. It is used in gearboxes, pumps, motors and transmission equipment to retain oil or grease and block the entry of contaminants.
How do I request a quote or an equivalent?
Write to us on WhatsApp with code 5147 or the dimensions 50 x 72 x 12 mm. If you have the equipment part number or a photo of the old seal, even better: that way we can verify the designation and offer you a compatible alternative.
Request a quote for 5147 via WhatsApp
Request a quote on WhatsApp