Radial shaft seal DBH 5132 — 34.00 x 52.00 x 7.50

DBH 5132 is a radial shaft seal reference, within Seals. Request a quote for 5132 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5132 radial shaft seal is a lip seal that closes off the passage of oil or grease at the point where a shaft passes through a housing. Its Lx design combines a sealing lip with a metal body that fits under pressure, and it works on rotating or static shafts in gearboxes, motors and reducers. With dimensions of 34 mm shaft, 52 mm housing and 7.50 mm height, it is a common replacement part in industrial equipment.

This item is a DBH 5132 radial shaft seal, identified by its designation 5132. Its dimensions are 34 mm shaft diameter (d), 52 mm housing diameter (D) and 7.50 mm height (h). The Lx design indicates a single lip configuration with spring, suitable for retaining lubricant and excluding contaminants in applications where the shaft rotates. The outer body is metal and the sealing lip is made of elastomer material, although the manufacturer's product page confirms the exact compound.

Typical applications for a shaft seal of these dimensions include gearboxes, pumps, electric motors, reducers and power transmission equipment. In all cases, the seal is mounted in the housing and seals against the shaft, preventing oil leaks and the entry of dust or water. It is a wear part that should be replaced when a leak appears or when the lip shows stiffness or damage.

To install a radial shaft seal, check that the shaft has no burrs or splines and that the sealing surface is clean and lubricated. The seal is inserted perpendicular to the shaft, with a tube or press that rests on the outer edge, never on the lip. Selection depends on shaft speed, working temperature and the fluid to be retained; if the original seal has a different designation, it is advisable to compare dimensions and lip type before replacing it.

If you need an equivalent or a nearby size, the most practical thing is to send us the code 5132 or the dimensions 34 x 52 x 7.50 by WhatsApp. You can also indicate the type of equipment and the brand of the original seal. At MR Accesorios Industriales we review alternatives within the same category of seals and shaft seals so that you find the part that best suits your application.

DBH is an official brand that MR carries, and this seal joins the line of seals and shaft seals available. If the code 5132 does not exactly match the one you have, send us a photo or the dimensions taken with a caliper and we will guide you. Quotes are handled by WhatsApp, with the same technical support as always.