DBH 5091 radial shaft seal — 66.68 x 112.7 x 11.11

DBH 5091 is a reference of radial shaft seal, within Seals. Request a quote for 5091 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5091 radial shaft seal is a lip seal that stops lubricant from escaping and blocks dust, water or particles from entering equipment with a rotating shaft. It is press-fitted into the housing and runs on the shaft with a flexible lip that compensates for minor misalignment. It is a wear part: when oil loss or dirt ingress appears, it is replaced. MR Accesorios Industriales sells this brand and advises you on choosing the right size.

This item is a DBH radial shaft seal with designation 5091. Its dimensions are shaft 66.68 mm, housing 112.70 mm and height 11.11 mm, with Lx design. The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. The shaft dimension defines the diameter where the lip runs; the housing dimension, the seat where it is press-fitted; and the height, the total width of the seal. Check all three values before ordering, because even a minimal difference prevents installation or causes leaks.

It is used in gearboxes, pumps, electric motors, mixers, conveyors and power transmission equipment in general. It also appears in agricultural machinery, process lines and plant equipment where shafts rotate inside an oil-filled housing. In all those cases it performs the same function: retaining the lubricant on the inner side and preventing contaminants from the environment from entering. If the equipment works with a lot of dust, pressurized water or high temperature, it is advisable to check the condition of the seal more often.

To install it, clean the housing and the shaft, check that there are no burrs or marks that could damage the lip, and lubricate the seal before inserting it. The seal must go in perpendicular, without direct blows on the lip; use a tube or shim that rests on the metal edge. When selecting a replacement, respect all three dimensions and the design: a different lip may not seal the same way. If the shaft is worn in the contact area, consider a wear sleeve or an alternative solution before fitting the new seal.

If you cannot find the exact size or need an equivalent, send us the code 5091 together with the shaft, housing and height dimensions. With that data we look for a compatible alternative within the lines we sell. We can also check whether the Lx design is right for your application or whether another type of lip is better. The more complete the equipment information, the more accurate the answer.

MR Accesorios Industriales sells the DBH brand as part of its line of seals and oil seals. If you need a quote for the DBH 5091 oil seal, write to us on WhatsApp with the code and the dimensions. We reply with the corresponding reference and the quote conditions.