DBH 5080Vit radial shaft seal — 62 x 100 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
- Seal material
- Viton
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 5080Vit is a reference of radial shaft seal, within Seals. Request a quote for 5080Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 5080Vit radial shaft seal is a lip seal fitted in the housing that closes against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions are 62 mm shaft, 100 mm housing bore and 12 mm height, with an Lx design. It is used in gearboxes, pumps, electric motors and transmission equipment operating with 62 mm shafts. MR Accesorios Industriales sells it as part of its line of seals and oil seals.
This item is a radial shaft seal from the DBH line, identified as 5080Vit. Its dimensions are 62 mm shaft diameter (d), 100 mm housing bore (D) and 12.00 mm height (h). The indicated design is Lx, which corresponds to a configuration with a sealing lip and a reinforced body for service on rotating shafts. The code 5080Vit makes it possible to locate it within the DBH seal category and verify its interchangeability with other references in the same series.
Typical applications for a seal of this size include gearboxes, speed reducers, centrifugal pumps, electric motors and belt or chain transmission equipment. In all cases, the seal serves to confine the oil or grease inside the assembly and prevent the entry of external contaminants. It is a wear part that should be replaced when leaks, abnormal noises or shaft play appear.
For installation, check that the shaft and housing are clean, free of burrs and marks that could damage the lip. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and fit the seal with a press or a tube of suitable diameter, applying uniform force on the outer ring. Avoid striking the lip or the spring. Seal selection must consider shaft speed, working temperature and lubricant type, in addition to the shaft and housing dimensions.
If you need an equivalent, you can send us the code 5080Vit or the dimensions 62 x 100 x 12 mm by WhatsApp. We can also help you identify the seal from the brand and model of the equipment where it is fitted.
To request a quote for the DBH 5080Vit seal or ask about other sizes in the line, write to us by WhatsApp and we will reply shortly.
Dimensions
- Shaft (d)
- 62mm
- Housing bore (D)
- 100mm
- Height (h)
- 12.00mm
- Design
- Lx
Frequently Asked Questions
- What are the dimensions of the DBH 5080Vit seal?
- The DBH 5080Vit seal has a 62 mm shaft diameter, a 100 mm housing bore and a 12.00 mm height. These are the dimensions you need to verify compatibility with your equipment.
- What does the Lx design mean on this seal?
- The Lx design indicates a construction configuration of the seal, with a sealing lip and a body that adapts to the housing. For the specific technical details of this variant, we recommend consulting the manufacturer's data sheet or writing to us by WhatsApp.
- How do I request a quote or an equivalent?
- Send the code 5080Vit or the dimensions 62 x 100 x 12 mm by WhatsApp. You can also tell us the brand and model of the equipment where the seal is fitted so we can help you identify the correct part.