Radial shaft seal DBH 1341

DBH 1341 is a radial shaft seal reference, within Seals. Request a quote for 1341 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1341 radial shaft seal is a lip seal designed to be mounted in 60 mm diameter housings, with a total height of 8 mm and A 378 design. Its function is to retain lubricant inside the assembly and prevent the ingress of dust, water or particles that could damage bearings and shafts. It is used in gearboxes, pumps, electric motors and power transmission equipment, where reliable sealing is key to component service life.

This item is a radial shaft seal from the DBH brand, identified with code 1341. According to the product page data, the housing diameter is 60 mm, the height is 8.00 mm and the design is A 378. The shaft diameter is listed as 0 mm, so the exact measurement must be confirmed against the manufacturer's technical data sheet before purchase. The A 378 design defines the lip geometry and the type of elastomer, suitable for applications with moderate peripheral speeds and exposure to industrial oils and greases.

Seals of this type are used in equipment where it is necessary to confine lubricant and protect against contaminants. Typical applications include gearboxes, centrifugal pumps, electric motors, compressors, machine tools and belt or chain drive systems. In all cases, the seal works on a rotating shaft and a stationary housing, and its correct selection depends on speed, temperature and the type of fluid to be retained.

To install a radial shaft seal, verify that the housing and shaft are clean and free of burrs. Lubricate the lip with the same oil or grease used in the equipment before installation. Insert the seal perpendicular to the shaft, using a mounting tube or press that bears on the outer diameter, never on the lip. If the housing shows wear, evaluate the use of a seal with greater height or a repair sleeve. The final selection must consider shaft speed, working temperature and the chemical compatibility of the elastomer.

If you need an equivalent seal or a nearby size, contact MR Accesorios Industriales and mention code 1341 or the housing diameter and height. You can also provide the shaft and housing dimensions measured with a caliper, and the type of fluid to be retained. With that data, the technical team can search for alternatives in other brands or series that fulfill the same function. Remember that the 1341 designation is specific to DBH and may not match the nomenclature of other manufacturers.

To request a quote for the DBH 1341 seal or ask about a similar size, write to us on WhatsApp and send us the code. MR Accesorios Industriales sells this brand and can advise you on the application, installation and available alternatives. If you have doubts about the shaft measurement, send us a photo of the assembly or the dimensions taken with a caliper. That way we can identify the correct seal and avoid installation errors.