Radial shaft seal DBH 1315

DBH 1315 is a radial shaft seal reference, within Seals. Request a quote for 1315 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1315 radial shaft seal is a lip seal designed to prevent lubricant leaks and the ingress of contaminants in rotating equipment. It is installed in 110 mm diameter housings and has a height of 10 mm. Its A 378 design corresponds to a standard single-lip configuration with spring, suitable for rotating shafts in industrial applications. MR Accesorios Industriales carries this official brand and advises you so you can choose the correct seal for your equipment.

The DBH 1315 is a radial shaft seal with the designation 1315. According to the product page data, the housing diameter is 110 mm and the overall height is 10 mm. The shaft diameter is listed as 0 mm, a value that must be confirmed against the manufacturer's technical data sheet before purchase. The A 378 design indicates a construction with a sealing lip and retaining spring, intended to retain oil or grease in assemblies with rotating motion.

This type of seal is used in gearboxes, pumps, electric motors, rollers and transmission equipment where the passage of the shaft through the housing must be sealed. It also appears in applications with moderate exposure to dust or moisture, provided the lip material is compatible with the fluid and the working temperature. It is a wear part that should be replaced when leaks or hardening of the lip are detected.

To install a radial shaft seal, check that the housing is clean and free of burrs, and lubricate the lip before inserting it. Pressure must be applied evenly on the outer ring, never on the lip. When selecting, in addition to the dimensions, take into account the peripheral speed, temperature and type of lubricant. If the shaft shows wear, consider a repair sleeve or an alternative size.

If you need a seal equivalent to the DBH 1315 or a nearby size, send us the full part number, the shaft, housing and height dimensions, and a photo of the part. With that data we can look for an alternative within the same brand or from another brand we carry. We can also guide you if the shaft diameter must be confirmed with a caliper on the disassembled equipment.

MR Accesorios Industriales carries the DBH brand as part of its line of seals and oil seals. To request a quote for the 1315 or ask about a similar size, write to us on WhatsApp and send us the part number. We will reply with the available technical information and supply options.