DBH 1199 radial shaft seal — 38 x 52 x 10

DBH 1199 is a reference of radial shaft seal, within Seals. Request a quote for 1199 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 1199 radial shaft seal is a lip seal that closes off the passage of lubricant and blocks the ingress of dust and moisture at the point where a shaft rotates inside a housing. With dimensions of 38 mm shaft, 52 mm housing and 10 mm height, and Lx design, it is used in gearboxes, pumps, electric motors and transmission equipment operating with rotating shafts. MR Accesorios Industriales sells this brand and advises you on choosing the right seal.

This item is a DBH 1199 radial shaft seal, identified by its 1199 designation. Its dimensions are 38 mm shaft diameter (d), 52 mm housing diameter (D) and 10.00 mm height (h). The Lx design corresponds to a single-lip seal with a spring, intended to retain lubricant in applications where the shaft rotates in one direction. The elastomeric lip rests on the shaft and the spring maintains contact pressure to compensate for wear.

Typical applications for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, compressors and belt or chain transmission equipment. In all cases it fulfills the function of sealing the passage of oil or grease to the outside and preventing contaminating particles from entering. It is a wear part that should be replaced when a visible leak appears or when the lip shows hardening or cracks.

To install it, verify that the shaft is clean, free of burrs and marks, and lubricate the lip before inserting it. The seal must enter perpendicular to the housing, without blows that deform the casing. When selecting a replacement, in addition to the 38 x 52 x 10 mm dimensions, take into account the type of fluid, the working temperature and the peripheral speed of the shaft. If the equipment operates with high vibration or misalignment, a design with greater dust protection may be preferable.

If you need an equivalent size, send us the 1199 code along with the shaft, housing and height dimensions. You can also send a photo of the old seal or the housing drawing. At MR Accesorios Industriales we compare that data with the applicable options and confirm which option fits without modifying the equipment. If the Lx design is not suitable for your application, we evaluate other lip and material variants.

To request a quote for the DBH 1199 oil seal or ask about an equivalent size, write to us via WhatsApp with the code and dimensions. We will reply with the alternative that best suits your equipment. MR Accesorios Industriales sells this brand.