Radial shaft seal DBH 1162

DBH 1162 is a radial shaft seal reference, within Seals. Request a quote for 1162 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1162 oil seal is a radial seal with an A 378 design that fits housings with a 32 mm diameter and a height of 6 mm. Its function is to retain lubricant inside the assembly and prevent dust, water or particles from entering that accelerate wear on bearings and bushings. It is used in rotating equipment where the shaft turns inside a fixed housing, and it is a key part for extending the service life of the machine.

This item is a radial shaft seal from the DBH line, identified with code 1162. According to the product page data, the housing bore (D) measures 32 mm and the height (h) is 6 mm, with an A 378 design. The A 378 design corresponds to a single lip configuration with a spring, suitable for rotating shafts with lubrication.

Seals of this type are used in gearboxes, centrifugal pumps, electric motors, drive shafts and continuous process equipment. They also appear in machine tools, compressors and conveyor systems where lubricated environments must be separated from environments with dust or moisture. In all these cases, the seal works on the shaft and against the housing, and its correct selection depends on the speed, temperature and type of lubricant in the equipment.

When installing a radial shaft seal, check that the housing is clean, free of burrs or marks, and that the shaft shows no wear in the lip contact area. The 6 mm height defines the available space in the cavity, so do not force the part or strike it during installation. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and make sure the spring is on the side of the fluid to be retained. If the shaft has a groove or a shoulder, ask us before mounting.

If you need a nearby size or an equivalent from another brand, send us code 1162 along with the shaft, housing and height measurements you have on the equipment. With that data we can look for an alternative within the DBH line or from other brands we carry. We can also guide you if the A 378 design is not suitable for your application and it is worth evaluating another type of lip or material.

MR Accesorios Industriales carries the DBH brand as part of its line of seals and oil seals, with more than 80 years of experience in the field. If you want to request a quote for the 1162 oil seal or ask about a similar size, write to us on WhatsApp with the code and the dimensions of your equipment. We will reply with the available option and the technical data you need to make your purchase decision.