DBH 1104 radial shaft seal — 107.95 x 152.63 x 24.66

DBH 1104 is a reference of radial shaft seal, within Seals. Request a quote for 1104 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 1104 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With dimensions of 107.95 mm shaft diameter, 152.63 mm housing diameter and 24.66 mm height, and design A 222, it is press-fitted into crankcases, gearboxes and pumps. MR Accesorios Industriales supplies this brand and advises you on choosing the right seal for your equipment.

This item is a DBH 1104 radial shaft seal, identified by code 1104 and design A 222. Its dimensions are shaft (d) 107.95 mm, housing (D) 152.63 mm and height (h) 24.66 mm. Design A 222 corresponds to a seal with a sealing lip and metal case, designed to retain lubricant and exclude contaminants on rotating shafts. It is mounted in the housing with an interference fit and the lip rests on the shaft with slight radial pressure.

Typical applications for this seal include gearboxes, reducers, centrifugal pumps, electric motors and power transmission equipment. In these assemblies, the seal prevents oil leaks and the entry of dust or water, extending the life of bearings and gears. It is commonly found in industrial equipment where the shaft rotates at moderate speeds and the operating temperature is stable.

For correct installation, make sure the housing and shaft are clean and free of burrs, lubricate the lip with the same oil used in the equipment and fit the seal perpendicular to the shaft, without striking it directly. Selection depends on peripheral speed, pressure and the type of lubricant. If the shaft shows wear, consider a seal with an auxiliary lip. Always compare the actual dimensions with those on the data sheet before replacing.

If you need an equivalent, send us code 1104 or the dimensions of your current seal (shaft diameter, housing diameter and height) by WhatsApp. At MR Accesorios Industriales we can look for alternatives within the same brand or from other lines we supply, respecting the tolerances and sealing design. We also ask you for a photo of the seal and the housing to confirm the lip type and material.

To request a quote for the DBH 1104 seal, write to us on WhatsApp and send us the code or the dimensions. We will reply with replacement options. MR Accesorios Industriales supports Argentine industry with power transmission and sealing components.