DBH 1062 radial shaft seal — 50.8 x 66.6 x 7

DBH 1062 is a reference of radial shaft seal, within Seals. Request a quote for 1062 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 1062 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. With dimensions of 50.80 mm shaft diameter, 66.60 mm housing diameter and 7.00 mm height, and an A 201 design, it is used in equipment where axial space is limited and a reliable seal is required. MR Accesorios Industriales carries this brand so you can handle replacements with the exact size.

This item is a DBH brand radial shaft seal, identified by part number 1062. Its dimensions are 50.80 mm for shaft diameter (d), 66.60 mm for housing diameter (D) and 7.00 mm height (h). The A 201 design corresponds to a single lip configuration with spring, suitable for rotating shafts. These dimensions allow it to be mounted in housings with a specific tolerance and ensure a seal against oil or grease leaks.

Typical applications for a seal such as the DBH 1062 include gearboxes, pumps, electric motors, drive shafts and continuous process equipment. In all cases, its function is twofold: to prevent lubricant from escaping and to block the entry of dust, water or particles that accelerate wear on bearings and gears. It is a critical part in preventive and corrective maintenance.

To correctly select and install this seal, verify that the shaft and housing diameters match the indicated dimensions. The shaft surface must be polished and free of burrs; lubricate the lip before inserting it and use an installation tool that presses on the outer ring, never on the lip. Avoid impacts and make sure the seal sits perpendicular to the shaft for uniform sealing.

If you need an equivalent, you can send us part number 1062 or the dimensions 50.80 x 66.60 x 7.00 mm. At MR Accesorios Industriales we have alternatives from other brands and can guide you according to the type of application and working conditions. The goal is for you to find the part that best suits your equipment, without complications.

To request a quote for the DBH 1062 seal, send the part number by WhatsApp to MR Accesorios Industriales. We reply with compatible options. So we can advise you with technical judgment and speed.