Flange bearing 2 holes BROWNING VF2B-232S

BROWNING VF2B-232S is a flange bearing 2 holes reference, within Bearing housings. Request a quote for VF2B-232S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange Y-bearing housing with insert bearing is an assembled unit that combines a cast iron housing with an insert bearing, designed to support rotating shafts on flat structures. The flange is bolted to the machine face and the insert is secured to the shaft, so the assembly absorbs radial loads and allows rotation with simple alignment. MR Accesorios Industriales supplies the VF2B 200 series from BROWNING, an official brand that MR carries.

The VF2B 200 series designation is read in blocks: the letters identify the housing type and its mounting configuration, and the three-digit number refers to the nominal shaft diameter for which the insert is assembled. The S suffix indicates the sealing variant of the insert. In the examples VF2B-220S and VF2B-232S the same pattern is visible: VF2B housing and shaft number. By providing the full part number, the part is identified unambiguously.

These housings appear in belt and roller conveyors, packaging lines, mixers, blowers, screens and process lines in food, chemical and aggregate plants. In Argentina they are found in material handling equipment and in machines that work with horizontal shafts supported on sheet metal or structural profile, where the 2-bolt flange simplifies anchoring and replacement.

To select correctly, start with the shaft diameter and the type of load: predominantly radial or with an axial component. Check the insert sealing according to the environment (dust, water, washdown) and choose the lubricant based on the working temperature. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify shaft alignment before starting up.

Across brands, 2-bolt flange housings with insert are interchangeable by shaft number and housing configuration, but the insert locking system, sealing and tolerances change. It is advisable to compare the flange geometry and hole diameter before replacing. If in doubt, send the part number or model by WhatsApp to MR Accesorios Industriales and we will indicate the compatible alternative.

With more than 80 years in the industry, MR Accesorios Industriales supports workshops and plants in Buenos Aires, Argentina, in the replacement of mounted bearings. Write to us on WhatsApp with the VF2B part number or the equipment model and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.