BGL OHS3036HE hydraulic sleeve

BGL OHS3036HE is a reference of hydraulic sleeve, within Bushings and sleeves. Request a quote for OHS3036HE via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BGL OHS HE hydraulic sleeve is an adapter sleeve with internal and external channels for injecting oil under pressure. That oil generates a film that reduces friction and allows mounting and, above all, dismounting the assembly without blows or excessive effort. It is designed for medium and large shafts, from 140 mm, and is used to secure bearings, pulleys, couplings or other components on the shaft.

The designation OHS…HE reads as follows: OHS identifies the hydraulic sleeve family; the number that follows, as in OHS3034HE, OHS3036HE or OHS3134HE, indicates the bearing size: the last two digits, multiplied by 5, give its bore (170 mm in OHS3034HE, 180 mm in OHS3036HE). The suffix HE indicates that the oil injection channel is on the outer side, which defines where the lubricant is introduced for mounting and dismounting. With this data, the exact part is selected for each application.

These sleeves are used in process industries, steel, cement, mining, paper, energy and treatment plants, where there are large-diameter shafts and periodic dismounting. In Argentina they appear in gearboxes, mills, large pumps, fans, conveyor belts and rotating equipment. Their advantage is that they simplify maintenance: by injecting oil, the interference is released and damage to the shaft or bearing during extraction is avoided.

To select the sleeve, verify the shaft diameter, the outer diameter and the seat width. Mounting requires cleaning the surfaces, applying oil through the corresponding channels and respecting the recommended injection pressure. Lubrication must be adequate to avoid contaminating the system, and alignment between shaft and component is key for uniform securing. Careful mounting extends the life of the assembly and facilitates future dismounting.

BGL hydraulic sleeves are interchangeable with those of other brands that use the same securing system and oil channels. If the customer brings a code from another brand or an unidentified part, at MR Accesorios Industriales we quote it and indicate the compatible equivalent. Interchangeability depends on dimensions and channel type, not only on the commercial designation.

To request a quote for your BGL OHS HE hydraulic sleeve, send us the complete code or the shaft and seat measurements via WhatsApp. At MR Accesorios Industriales we send you the quote promptly and advise you so that the part is the correct one.