BGL OHE3168H hydraulic sleeve

BGL OHE3168H is a reference of hydraulic sleeve, within Bushings and sleeves. Request a quote for OHE3168H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BGL OHE…H hydraulic sleeve is a fastening element with inner and outer oil channels that allow pressurized oil to be injected to facilitate mounting and, above all, dismounting. It is used on medium and large shafts, from 140 mm, where interference fits require a controlled method. MR Accesorios Industriales sells it as exclusive representative in Argentina and will quote it to you on WhatsApp.

The OHE…H designation is read in parts: OHE identifies the hydraulic sleeve with an oil channel on the outer side, and the number that follows indicates the size. In the examples, OHE30/500H and OHE31/500H are from series 30 and 31 for bearings with a 500 mm bore, while OHE2332H to OHE2340H cover bores from 160 to 200 mm. The H suffix confirms the outer channel. These references are ordered by full part number to avoid confusion.

They are used in applications where periodic dismounting is critical: rolling mills, presses, mills, cranes, paper machines and mining equipment. In Argentina, the steel, cement, mining and oil & gas sectors are the ones that choose them most due to the need for fast and safe interventions. They also appear in large transmissions and in high-load roller shafts.

To select the sleeve, check the shaft diameter and the outer diameter of the part to be fastened. Mounting requires clean surfaces, low-viscosity oil and a manual or hydraulic pump that generates the appropriate pressure. Oil lubrication facilitates sliding and reduces the risk of seizing. The alignment between shaft and sleeve must be careful to avoid deformation.

As for equivalents, other manufacturers use their own nomenclatures for hydraulic sleeves with similar channels. If you bring the part number from another brand or an unidentified part, at MR Accesorios Industriales we will indicate the compatible alternative. Interchangeability depends on the dimensions and the type of channel, so it is best to request a quote with the exact size.

To move forward, send us the OHE…H part number you need or your shaft dimensions on WhatsApp and we will quote it to you shortly. We can also advise you on mounting and the appropriate lubrication for your application.