Hydraulic sleeve BGL OHE3160HTLTL

BGL OHE3160HTLTL is a hydraulic sleeve reference, within Bushings and sleeves. Request a quote for OHE3160HTLTL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BGL hydraulic sleeve of the OHE HTLTL line is an adapter sleeve with internal and external channels that allow oil to be injected under pressure. That lubricating film facilitates mounting and, above all, removal on medium and large shafts, from 140 mm. It is used to fasten bearings, pulleys, couplings and other components onto plain shafts, with a firm fit and precise centering. MR Accesorios Industriales sells it as exclusive representative in Argentina.

The designation of this line reads in parts: OHE identifies the type of hydraulic sleeve, the number that follows indicates the nominal shaft diameter, and the suffixes HTLTL define the configuration of channels and injection threads. For example, OHE3160HTLTL corresponds to a 160 mm shaft; OHE3164HTLTL, to 164 mm; OHE3168HTLTL, to 168 mm; and OHE3172HTLTL, to 172 mm. The suffix H in the general designation indicates that the oil channel is on the outer side, which guides the connection of the injection pump.

These sleeves are used in equipment where frequent removal or interference fits require a safe method. Industries such as cement, steel, mining, paper and material handling use them in gearboxes, mills, presses, cranes and conveyors. In Argentina, MR Accesorios Industriales supplies them for plants that need to replace components without damaging the shaft or the seat, especially in large diameters where friction dragging would be unfeasible.

To select the sleeve, check the shaft diameter and the seat dimensions according to the corresponding standard. Lubrication with oil under pressure is key: it is injected through the channels until the sleeve expands enough to slide without effort. During mounting, check the alignment and avoid blows that deform the channels. Once positioned, release the pressure and the fit restores itself. Cleaning the injection threads and using clean oil extends the life of the component.

As for equivalents, hydraulic sleeves from different brands often share standardized dimensions, but the suffixes and channels may vary. If you have the code of another brand or an unidentified part, send us the data and we will indicate the compatible alternative. Interchangeability depends on the series and the diameter; it is not enough for the shaft number to match. That is why it is advisable to request a quote with the full code or with the measurements taken.

To request a quote for the BGL hydraulic sleeve you need, send the code or the shaft measurements by WhatsApp to MR Accesorios Industriales. We will reply shortly with the exact reference and the technical information for your application. If you are looking for a variant you do not see, write to us with the model and we will quote it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.