Product page
Hydraulic sleeve BGL OHE3148H
- Manufacturer Part Number
- OHE3148H
- Brand
- BGLExclusive representative in Argentina
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
BGL OHE3148H is a hydraulic sleeve reference, within Bushings and sleeves. Request a quote for OHE3148H via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The BGL OHE…H hydraulic sleeve is a fastening element with inner and outer channels that allow oil to be injected under pressure to facilitate mounting and, above all, dismounting. It is used on medium and large shafts, from 140 mm, where interference fits require a controlled method. MR Accesorios Industriales sells it as exclusive representative in Argentina and quotes it on WhatsApp.
The OHE…H designation is read in parts: OHE identifies the hydraulic sleeve with an oil channel on the outer side, and the number that follows indicates the size. In the examples, OHE30/500H and OHE31/500H correspond to shaft diameters of 30 and 31 inches, while OHE2332H to OHE2340H cover the 2332 to 2340 series. The H ending confirms the outer channel. These references are ordered by full code to avoid confusion.
They are used in applications where periodic dismounting is critical: rolling mills, presses, mills, cranes, paper machines and mining equipment. In Argentina, the steel, cement, mining and oil & gas sectors are the ones that choose them most, due to the need for fast and safe interventions. They also appear in large transmissions and in high-load roller shafts.
To select the sleeve, check the shaft diameter and the outer diameter of the part to be fastened. Mounting requires clean surfaces, low-viscosity oil and a manual or hydraulic pump that generates the appropriate pressure. Lubrication with oil makes sliding easier and reduces the risk of seizing. The alignment between shaft and sleeve must be careful to avoid deformation.
As for equivalents, other manufacturers use their own nomenclatures for hydraulic sleeves with similar channels. If you bring the code of another brand or an unidentified part, at MR Accesorios Industriales we will tell you the compatible alternative. Interchangeability depends on the dimensions and the type of channel, so it is best to request a quote with the exact size.
To move forward, send us on WhatsApp the OHE…H code you need or the dimensions of your shaft and we will quote it promptly. We can also advise you on the proper mounting and lubrication for your application.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What is the difference between a hydraulic sleeve and a common adapter sleeve?
- The hydraulic sleeve has inner and outer channels that allow oil to be injected under pressure. That makes mounting and especially dismounting easier, which is key on large shafts. The common adapter sleeve does not have those channels.
- For what shaft diameters is the OHE…H recommended?
- It is designed for medium and large shafts, from 140 mm and up. In the examples, the references cover from 30 inches up to the 2340 series. If your shaft is in that range, it is the right type.
- How do I request a quote for a BGL hydraulic sleeve?
- Write to us on WhatsApp with the full code, for example OHE30/500H, or with the dimensions of your shaft and the outer diameter of the part. We will quote it promptly.