Product page
Hydraulic sleeve BGL OHE3140HL
- Manufacturer Part Number
- OHE3140HL
- Brand
- BGLExclusive representative in Argentina
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
BGL OHE3140HL is a hydraulic sleeve reference, within Bushings and sleeves. Request a quote for OHE3140HL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The BGL OHE HL hydraulic sleeve is an adapter sleeve with inner and outer channels that allow oil to be injected under pressure to simplify mounting and, above all, dismounting. It is used to secure bearings or other components to medium and large shafts, from 140 mm. Its design streamlines maintenance tasks on equipment where disassembling without damaging the parts is key.
The OHE HL designation reads as follows: the letters OHE identify BGL's hydraulic sleeve series, and the HL suffix indicates that the oil channel is on the outer side. The intermediate numbers, as in OHE2332HL, OHE2340HL, OHE3132HL, OHE3134HL, OHE3136HL, OHE3138HL and OHE3140HL, correspond to the sleeve dimensions. To choose the correct part number, have the shaft diameter and the bearing seat dimensions on hand.
These sleeves are used in industries in Argentina such as steel, cement, mining and paper, where there are large-diameter shafts and equipment subjected to high loads. They also appear in gearboxes, mills, presses and large machines. The ability to inject oil simplifies dismounting without impacts or excessive heating, which protects the shaft and the bearing.
To select the sleeve, verify that the dimensions match the shaft and the bore of the bearing or component to be secured. Mounting is done with oil under pressure through the channels; follow the recommended procedure to avoid deformation. Lubrication and cleanliness of the surfaces are important for a correct fit. If the shaft shows wear, assess its condition before mounting.
As for equivalences, hydraulic sleeves from different brands can be interchanged if the main dimensions and the type of oil channel match. It is always advisable to compare the shaft and seat dimensions, and the channel location, before replacing a part. If you have another brand's part number, we can tell you the compatible alternative.
To request a quote for the BGL OHE HL hydraulic sleeve you need, send us the part number or the shaft and seat dimensions via WhatsApp. At MR Accesorios Industriales we advise you so you choose the right option and we quote you promptly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What is the difference between a standard adapter sleeve and a hydraulic one?
- The hydraulic sleeve has inner and outer channels that allow oil to be injected under pressure. This simplifies mounting and especially dismounting, because it reduces friction between the surfaces. On large shafts, where disassembling is more complicated, this feature simplifies maintenance.
- For what shaft diameters is the OHE HL sleeve recommended?
- It is designed for medium and large shafts, from 140 mm. If your shaft falls within that range, the hydraulic sleeve will make mounting and dismounting easier. To confirm the exact size, send us the shaft diameter and the seat dimensions.
- How do I request a quote for a BGL OHE HL sleeve?
- Write to us on WhatsApp with the part number on the part or with the shaft and bearing dimensions. At MR Accesorios Industriales we quote the sleeve you need and reply promptly.