BGL OHE31/500HT hydraulic sleeve

BGL OHE31/500HT is a reference of hydraulic sleeve, within Bushings and sleeves. Request a quote for OHE31/500HT via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BGL OHE HT hydraulic sleeve is a securing element mounted between shaft and housing with internal and external channels for injecting oil under pressure. That oil film reduces friction and facilitates mounting and, above all, dismounting on medium and large diameter shafts. It is used in power transmission, heavy machinery and equipment where the fit must be firm but removable without damaging the surfaces.

The designation OHE HT reads in parts: the letters OHE identify the series with oil channels, and the suffix HT indicates that the injection channel is on the outer side. The number that appears in between, as in OHE31/500HT, corresponds to the bearing bore in millimeters; the shaft is somewhat smaller. In this case, 500 mm. The OHE HT series differs from other variants by the location of the channels, which defines where the oil is injected during mounting and dismounting.

These sleeves are chosen in process industries, steel, cement, mining and paper, where shafts are large diameter and maintenance stops must be short. They also appear in gearboxes, mills, presses and large machines. In Argentina, they are found in plants that need to transmit high torque with a removable fit, without resorting to interferences that later complicate part removal.

To select a hydraulic sleeve, take into account the shaft and housing diameter, the torque to be transmitted and the available oil injection method. Mounting requires cleaning the surfaces, compatible oil and a manual or hydraulic pump to generate pressure. Alignment between shaft and housing is critical: any deviation can generate point loads and premature failures. Always follow the manufacturer's instructions for injection pressure and tightening order.

When looking for equivalents with other brands, compare the complete designation: diameter, channel type and suffix. A sleeve with an outer channel is not interchangeable with one with an inner channel without verifying the mounting direction. If you have a code from another brand or an unidentified part, send us the data and we will indicate the compatible alternative. Interchangeability depends on dimensions and the function of the channels, not only on diameter.

If you need to request a quote for a BGL OHE HT hydraulic sleeve or any other reference in the line, write to us on WhatsApp with the code or exact measurement. At MR Accesorios Industriales we quote you promptly and advise you so that the mounting is safe and durable.