Hydraulic sleeve BGL OH3192TLH

BGL OH3192TLH is a hydraulic sleeve reference, within Bushings and sleeves. Request a quote for OH3192TLH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BGL hydraulic adapter sleeve from the OH...TLH line is a connecting component placed between shaft and hub to transmit loads by interference. Unlike the conventional sleeve, it incorporates inner and outer channels that allow oil to be injected under pressure, which facilitates mounting and, above all, dismounting on large-diameter shafts. It is recommended for medium and large shafts, from 140 mm, in applications where clean, damage-free disassembly is a priority.

The designation OH...TLH is interpreted as follows: the letters OH identify the BGL hydraulic sleeve series; the central numeric block (for example, in OH3192TLH) defines the size and main dimensions; and the suffix TLH indicates the variant with oil channels. Within the series, the final letter H indicates that the injection channel is on the outer side, which guides mounting according to the available access. To request a quote, send us the complete code shown on the drawing or on the part.

These sleeves are used in continuous process industries where large shafts require reliable, removable connections: steel, cement, mining, paper, energy and treatment plants. In Argentina, they are commonly found in gearboxes, mills, presses, high-flow pumps and heavy transmission equipment. The ability to inject oil reduces the risk of seizure and allows the sleeve to be removed without impacts or excessive heating, which is key when the equipment cannot be out of service for long.

To select the correct hydraulic sleeve, take into account the shaft diameter (from 140 mm depending on the series), the hub bore diameter, the width of the contact area and the load to be transmitted. During mounting, clean and verify the alignment of the surfaces; apply oil through the channels with a hand pump until the sleeve seats without forcing. During dismounting, the oil injection generates a film that reduces friction and facilitates extraction. Always follow the manufacturer's instructions for oil pressure and tightening sequence.

BGL hydraulic sleeves can be interchanged with those of other brands that follow the same standard for dimensions and oil channels. The key is to compare the bore diameter, outer diameter, total width and channel location (inner or outer). If another brand's code does not match, our technical team can identify the equivalent from the measurements or the drawing. Not all series are interchangeable with each other; therefore, it is advisable to validate the geometry before replacing.

If you need a BGL hydraulic sleeve or want to confirm the equivalent with another brand, write to us via WhatsApp with the code OH3192TLH or with the shaft and hub measurements. At MR Accesorios Industriales we quote you promptly and advise you so that the part fits without surprises. With more than 80 years in the field, we support Argentine industry with reliable fastening solutions.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.