Hydraulic sleeve BGL OH3132HL

BGL OH3132HL is a hydraulic sleeve reference, within Bushings and sleeves. Request a quote for OH3132HL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BGL hydraulic sleeve of the OH...HL line is a fastening component placed between shaft and bearing to secure the joint and simplify mounting and dismounting tasks. Unlike a conventional adapter sleeve, it incorporates inner and outer channels that allow oil to be injected under pressure and thus reduce the effort required to install or remove the part. It is recommended for medium and large shafts, from 140 mm in diameter.

The designation of this series combines the letters OH with a four-digit number and the suffix HL. Examples such as OH2332HL, OH2340HL, OH3132HL, OH3134HL, OH3136HL, OH3138HL and OH3140HL show that the first two digits identify the sleeve type and the next two the size. The HL suffix indicates that the oil channel is arranged on the outer side, which defines the injection method for mounting and dismounting.

These sleeves are used in equipment with large-diameter shafts where mounting and dismounting require controlled methods. They appear in rolling mills, presses, mills, paper machines, cranes and large conveyors. In Argentina, the metallurgical, cement, mining and power generation sectors use them to secure bearings on shafts that must be disassembled frequently or that work under high loads.

To select the correct hydraulic sleeve, you must start from the shaft diameter and the bearing to be secured, since the dimensions match those of the equivalent adapter sleeve. During mounting, oil is injected through the channels to create a film that facilitates sliding; then the pressure is released and the part is fitted. It is important to clean the channels well before using them, use the recommended oil and verify the alignment of the assembly to avoid deformation.

BGL hydraulic sleeves can be interchanged with those of other brands that follow the same dimension standard. If the customer brings another brand's part number or an unidentified part, at MR Accesorios Industriales we tell them the compatible equivalent. Interchangeability is based on standardized dimensions, not on the commercial part number, so it is always advisable to confirm the diameter and the type of channel before replacing.

To request a quote for the BGL hydraulic sleeve you need, write to us on WhatsApp with the full part number or with the shaft and bearing dimensions. At MR Accesorios Industriales we quote the exact part number or size you request and advise you so the part is the right one. The reply is prompt.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.