Adapter sleeve BGL HS2340L

BGL HS2340L is a adapter sleeve reference, within Bushings and sleeves. Request a quote for HS2340L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BGL adapter sleeve of the HS L line is a mounting component that allows tapered bore bearings to be fixed on plain shafts, with no need for a shoulder or special machining. It is supplied as a complete assembly: sleeve, lock nut and lock washer or MS lock. It is made of BGL nodular cast iron, with carbon steel or stainless steel options depending on the application. It is a practical solution for power transmission and rotating equipment in general.

The HS L series designation is read step by step: the letters HS identify the adapter sleeve family; the first digits indicate the shaft diameter on which it is mounted, and the following digits indicate the tapered bore diameter of the bearing. The final letter L indicates the long version of the sleeve. For example, HS2324L corresponds to a sleeve for a 4-inch shaft and a 120 mm tapered bore bearing; HS3124L, for a 4-inch shaft and a 110 mm bearing. Knowing this logic makes it possible to identify the correct replacement part from the code stamped on the part.

These sleeves are used in a wide variety of industries in Argentina: food processing, cement, steel, paper, mining and aggregate processing plants, among others. They are common in gearboxes, belt conveyors, bucket elevators, mills, mixers and centrifugal pumps. Their function is to secure the bearing on the shaft and transmit loads without play, simplifying mounting and dismounting in equipment where the shaft has no shoulder or support step.

To select the correct sleeve, take into account the shaft diameter (maximum tolerance h10), the tapered bore diameter of the bearing and the type of fixing required. The assembly is supplied with lock nut and lock washer or MS lock, which simplifies assembly. During mounting, check that the tapered surfaces are clean, apply the recommended lubricant and tighten the lock nut with the proper wrench until the internal clearance specified for the bearing is obtained. Correct alignment and controlled tightening prevent overloads and extend the service life of the assembly.

As for equivalences, adapter sleeves are identified by international standards and designations that may vary between manufacturers. If you need to replace a sleeve from another brand, the most practical approach is to compare the main dimensions: shaft diameter, tapered bore diameter and length. With that data, at MR Accesorios Industriales we will tell you the compatible alternative or the exact part number you need. Interchangeability between brands depends on those dimensions being respected and on the type of lock.

To request a quote for the BGL adapter sleeve you need, write to us on WhatsApp with the complete part number (for example, HS2324L or HS3130L) or with the shaft and bearing measurements. At MR Accesorios Industriales we will reply shortly with availability and supply options. We can also advise you on mounting and complementary accessories so that your equipment is up and running without delays.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.