BGL HS2328L adapter sleeve

BGL HS2328L is a reference of adapter sleeve, within Bushings and sleeves. Request a quote for HS2328L via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BGL adapter sleeve from the HS L line is a mounting component that secures bearings with tapered bore onto plain shafts, with no need for a shoulder or special machining. It is supplied as a complete assembly: sleeve, lock nut and lock washer or MS lock. It is made of BGL nodular cast iron, with carbon steel or stainless steel options depending on the application. It is a practical solution for power transmission and rotating equipment in general.

The HS L series designation is read step by step: the letters HS identify the adapter sleeve family; the first digits indicate the shaft diameter on which it is mounted, and the following digits indicate the tapered bore diameter of the bearing. The final letter L indicates the long version of the sleeve. For example, HS2324L and HS3124L correspond to sleeves for bearings with a 120 mm tapered bore, from series 23 and 31 respectively. Understanding this logic lets you identify the correct replacement part from the code stamped on the part.

These sleeves are used in a wide variety of industries in Argentina: food plants, cement plants, steel mills, paper mills, mining and aggregate processing, among others. They are common in gearboxes, belt conveyors, bucket elevators, mills, mixers and centrifugal pumps. Their function is to secure the bearing on the shaft and transmit loads without play, simplifying assembly and disassembly on equipment where the shaft has no shoulder or support step.

To select the correct sleeve, take into account the shaft diameter (maximum tolerance h10), the tapered bore diameter of the bearing and the type of locking required. The assembly is supplied with a lock nut and lock washer or MS lock, which simplifies assembly. During mounting, check that the tapered surfaces are clean, apply the recommended lubricant and tighten the nut with the appropriate wrench until the specified internal clearance for the bearing is obtained. Correct alignment and controlled tightening prevent overloads and extend the service life of the assembly.

As for equivalents, adapter sleeves are identified by international standards and designations that may vary between manufacturers. If you need to replace a sleeve from another brand, the most practical approach is to compare the main dimensions: shaft diameter, tapered bore diameter and length. With that data, at MR Accesorios Industriales we can tell you the compatible alternative or the exact code you need. Interchangeability between brands depends on those dimensions and the type of lock being respected.

To request a quote for the BGL adapter sleeve you need, write to us on WhatsApp with the full code (for example, HS2324L or HS3130L) or with the shaft and bearing dimensions. At MR Accesorios Industriales we reply promptly with availability and supply options. We can also advise you on mounting and complementary accessories so your equipment is up and running without delays.