Product page
Adapter sleeve BGL HS2313E
- Manufacturer Part Number
- HS2313E
- Brand
- BGLExclusive representative in Argentina
- Category
- Bushings and sleeves
- Subcategory
- Adapter sleeve
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
BGL HS2313E is a adapter sleeve reference, within Bushings and sleeves. Request a quote for HS2313E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The BGL HS…E series adapter sleeve is a mounting component that allows tapered bore bearings to be mounted on plain shafts, without the need for a shoulder or special machining. It is supplied complete with sleeve, nut and lock washer or MS lock. Made of high-strength nodular cast iron, it is a practical power transmission solution for industrial equipment.
The HS…E series designation is interpreted by its letters and numbers: HS identifies the sleeve type, the number that follows indicates the size, and the E suffix corresponds to the variant with nut and lock washer. For example, HS306E, HS308E and HS310E are increasing sizes within the same family. When requesting a quote, send the complete part number so we can tell you the exact part.
These sleeves are used in power transmission equipment: gearboxes, conveyors, mills, mixers and agricultural machinery. In Argentina, they are common in food, cement, mining and aggregate processing plants, where tapered bearings mounted on sleeves make assembly and disassembly easier without damaging the shaft. MR Accesorios Industriales sells them throughout the country.
To select the correct sleeve, take into account the shaft diameter, which must have an h10 tolerance, and the tapered bore bearing you are going to mount. The fit is achieved by tightening the nut, which moves the sleeve along the taper. It is important to lubricate the threads and contact surfaces, and to verify alignment to avoid undue axial loads. The lock washer or MS lock secures the nut against loosening from vibration.
BGL nodular cast iron exceeds the requirements of DIN 1563 GJS 500-7 (formerly GGG50), which gives it good mechanical strength and toughness. Depending on the application, it can be requested in carbon or stainless steel. When replacing a sleeve, compare the main dimensions and the mounting type; if you have the part number from another brand, we will tell you the compatible equivalent.
To request a quote for your BGL HS…E series adapter sleeve, write to us on WhatsApp with the part number or size you need. We will reply shortly with the information so you can move forward with your project.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What bearings are mounted with the HS…E sleeve?
- They are used with tapered bore bearings of the series corresponding to the sleeve size. The sleeve and bearing part numbers must match in shaft diameter and taper. Send both part numbers and we will quote the combination.
- What material is the BGL HS…E sleeve made of?
- BGL nodular cast iron exceeds the DIN 1563 GJS 500-7 standard (formerly GGG50). Optionally it can be manufactured in carbon or stainless steel. Ask about the option you need when requesting a quote.
- How is the sleeve mounted on the shaft?
- The shaft must have an h10 tolerance and a clean surface. Place the sleeve, the bearing, and tighten the nut with the lock washer. Lubricate the thread and verify alignment. If you have any questions, write to us and we will advise you.